College of Engineering
College of Engineering
Dean Khosrow Behbehani
Department of Bioengineering
Chair Liping Tang
Conference Proceedings
B. Khan, N. Hervey, A. Stowe, T. Hodics, and G. Alexandrakis, “Use of functional near-infrared spectroscopy to monitor cortical plasticity induced by transcranial direct current stimulation,” Photonics West, 2013; Vol. 8565, 856560-1 – 12 (Oral presentation at the SPIE Conference, San Francisco, California, February 5, 2013).
N. Hervey, B. Khan, L. Shagman, F. Tian, M.R. Delgado, K. Tulchin-Francis, A. Shierk, L. Smith, D. Reid, N.J. Clegg, H. Liu, D. MacFarlane, and G. Alexandrakis, “Motion tracking and electromyography assist the removal of mirror hand contributions to fNIRS images acquired during a finger tapping task performed by children with cerebral palsy,” Photonics West, 2013; Vol. 8565, 856563-1 – 11 (Oral presentation at the SPIE Conference, San Francisco, California, February 5, 2013).
Journal Articles
K. Wu, J. Liu, S.F. Tseng, C. Gore, Z. Ning, N. Sharifi, L. Fazli, M. Gleave, P. Kapur, G. Xiao, X. Sun, O.K. Oz, W. Min, G. Alexandrakis, C.R. Yang, C.L. Hsieh, H.C. Wu, D. He, D. Xie, J.T. Hsieh, “The role of DAB2IP in androgen receptor activation during prostate cancer progression,” Oncogene. 2013 Apr 22 [Epub ahead of print]
Poster Abstracts
M.I. Romero-Ortega, A. Shierk, H. Roberts, L.B. Smith, N.J. Clegg, F. Tian, H. Liu, B. Kahn, G. Alexandrakis, and M.R. Delgado, “Constraint induced movement therapy mediates recovery of normal cortical activation in children with cerebral palsy,” Developmental Medicine and Child Neurology, (Poster presentation at AACPDM, Milwaukee, October 16-19, 2013).
Conference Papers
Shuo Li, Jean Gao, James O. Nyagilo, Digant P. Dave: Probabilistic Partial Least Square Regression: A Robust Model for Quantitative Analysis of Raman Spectroscopy Data, BIBM'11
Journal Articles
J. Li, J. O. N. Gao, and D. P. Dave. "Eigenspectra: A Robust Regression Method for Multiplexed Raman Spectra Analysis," in International Journal of Data Mining and Bioinformatics
Journal Articles
Bingbing Cheng, Ming-Yuan Wei, Yuan Liu, Harish Pitta, Zhiwei Xie, Yi Hong, Kytai T. Nguyen, Baohong Yuan. Development of ultrasound-switchable fluorescence imaging contrast agents based on thermosensitive polymers and nanoparticles. IEEE Journal of Selected Topics in Quantum Electronics 2013, 20(5): 6801214.
Jiao Yu, Keisuke Takanari, Yi Hong, Keewon Lee, Nicholas Amoroso, Yadong Wang, William Wagner, Kang Kim. Non-invasive characterization of polyurethane-based tissue constructs on rat abdominal repair model using high frequency ultrasound elasticity imaging. Biomaterials 2013, 34(11):2701-2709.
Keisuke Takanari*, Yi Hong*, Ryotaro Hashizume, Alexander Huber, Nicholas J. Amoroso, Antonio D’Amore, Stephen F. Badylak, William R. Wagner. Abdominal wall reconstruction by a regionally distinct biocomposite of extracellular matrix digest and a biodegradable elastomer. Journal of Tissue Engineering and Regenerative Medicine 2013. (Co- first author)
Ryotaro Hashizume, Yi Hong, Keisuke Takanari, Kazuro L. Fujimoto, Kimimasa Tobita, William R. Wagner. The effect of polymer degradation time on functional outcomes of temporary elastic patch support in ischemic cardiomyopathy. Biomaterials 2013, 34(30):7353-7363.
Syed D. Sajjad, Yi Hong, Fuqiang Liu. Synthesis of guanidinium based anion exchange membranes and their stability assessment. Polymer for Advanced Technologies, 2013. (online release)
Ye SH, Jang YS, Yun Y, Shankarraman V, Woolley JR, Hong Y, Gamble LJ, Ishihara K, Wagner WR. Surface modification of a biodegradable magnesium alloy with phosphorylcholine (PC) and sulfobetaine (SB) functional macromolecules for reduced thrombogenicity and acute corrosion resistance. Langmuir 2013, 29(26):8320-8327.
Conference Papers
Hanli Liu, “Optimal design for high-quality functional brain imaging by diffuse optical tomography,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8573-2, Feb. 2-7, 2013, San Francisco, California.
Amarnath S. Yennu, Rohit Rawat, Mayur Jadhav, Michael T. Manry, and Hanli Liu, “Investigation of human frontal cortex under noxious thermal stimulation of temporomandibular joint using functional near infrared spectroscopy,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8578-4, Feb. 2-7, 2013, San Francisco, California.
Bilal Khan, Nathan Hervey, Laura Shagman, Fenghua Tian, Hanli Liu, Duncan MacFarlane, George Alexandrakis, “Concurrent functional near-infrared imaging and motion tracking to assess functional improvement of children with cerebral palsy after constrained induced motion therapy,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8565G-198, Feb. 2-7, 2013, San Francisco, California.
Fenghua Tian and Hanli Liu, “EasyTopo: tool for rapid diffuse optical topography based on standard brain atlas,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8578-93, Feb. 2-7, 2013, San Francisco, California.
Fenghua Tian, Venkaiah C. Kavuri, and Hanli Liu, “Improved depth specificity and spatial resolution in brain atlas-guided diffuse optical tomography,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8578-4, Feb. 2-7, 2013, San Francisco, California.
Lin Li, Zi-Jing Lin, Mary Cazzell, and Hanli Liu, “Monitoring of human brain function in risk decision-making task by near-infrared spectroscopy using a pixel-wised general linear model,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8565F-161, Feb. 2-7, 2013, San Francisco, California.
Lin Li, Zi-Jing Lin, Mary Cazzell, and Hanli Liu, “Test-retest assessment of functional near-infrared spectroscopy to measure risk decision making in young adults,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8565F-165, Feb. 2-7, 2013, San Francisco, California.
Venkaiah C. Kavuri and Hanli Liu, “Development of multispectral transrectal ultrasound compatible near infrared imaging system for early detection of prostate cancer,” SPIE, Photonics West, BiOS Biomedical Optics Symposium, paper 8578-57, Feb. 2-7, 2013, San Francisco, California.
Journal Articles
Peter Leboulluec, Baohong Yuan, and Hanli Liu, “A compact and cost-efficient frequency-domain photoacoustic imaging technique,” American Journal of Physics, in press, (2013).
Book Chapters
A Nair, D Baker, L Tang. “Biological and chemical influence on immune and regenerative responses to biomaterial implants.” (Book Chapter) Joint Replacement Technology (accepted) (2013)
Journal Articles
A Nair, Y Tsai, K Shah, J Shen, H Weng, J Zhou, X Sun, R Saxena, L Tang. “The effect of erythropoietin on autologous stem cell-mediated bone regeneration” Biomaterials 34: 7364-7371 (2013)
EN Tang, A Nair, D Baker, W Hu, J Zhou. “In vivo imaging of infection using a bacteria-targeting optical nanoprobe.” J Biomed Nanotech 10 (5): 856-863 (2013)
Book Chapters
Menon JU, Wadajkar AS, Xie Z, Nguyen KT. Chapter 5: Nanomaterials for management of lung disorders and drug delivery, 167-202. In Nanomaterials in Drug Delivery, Imaging, and Tissue Engineering 2013 (Publisher: John Wiley and Sons Inc., Editors: A Tiwari and A Tiwari).
Journal Articles
Nguyen KT. Editorial: Mesenchymal stem cells as targeted cell vehicles to deliver drug-loaded nanoparticles for cancer therapy, J Nanomedic Nanotechnol 2013 (4:e128. doi:10.4172/2157-7439.1000e128).
Menon JU, Jadeja P, Tambe P, Vu K, Yuan B, Nguyen KT. Nanomaterials for photo-based diagnostic and therapeutic applications. Theranostics 2013; 3: 152-66.
Wadajkar AS, Menon JU, Kadapure T, Tran RT, Yang J, Nguyen KT. Design and application of magnetic-based nanoparticle system. Recent Patents on Biomed Eng 2013; 6: 47-57.
Wadajkar AS, Menon JU, Tsai Y, Gore C, Dobin T, Gandee L, Kangasniemi K, Takahashi M, Manandhar B, Ahn J, Hsieh J, Nguyen KT. Prostate cancer-specific thermo-responsive polymer-coated iron oxide nanoparticles. Biomaterials 2013; 34: 3618-25.
Awards and Honors
NSF CAREER Award
Editorial Roles
Editorial Board Member or Editor
(1) Technology in Cancer Research and Treatment
Guest Editor for Journals
(1) International Journal of Optics
Journal Articles
B. Yuan, and J. Rychak “Tumor functional and molecular imaging utilizing ultrasound and ultrasound mediated Optical techniques” , American Journal of Pathology, 182(2), 305-311, (2013)
B. Yuan, Y. Pei and J. Kandukuri, “Breaking the acoustic diffraction limit via nonlinear effect and thermal confinement for potential deep-tissue high-resolution imaging”, Applied Physics Letter. 102, 063703, (2013)
A. S. Wadajkar, S. Santimano, M. Rahimi, B. Yuan, S. Banerjee, and K. T. Nguyen, “Deep Vein Thrombosis: Current Status and Nanotechnology Advances”, 31(5), 504-513 (2013), Biotechnology Advances;
J. U. Menon, P. Jadeja, P. Tambe, K. Vu, B. Yuan, K. T. Nguyen, “Nanomaterials For Photo-Based Diagnostic And Therapeutic Applications”, Theranostics; 3(3), 152-166, (2013)
P. Leboulluec, H. Liu and B. Yuan, “A frequency-domain photoacoutic imaging system”, American Journal of Physics, 81(9), (2013)
Y. Liu and B. Yuan, An optical system for detecting 3D high-speed oscillation of a single ultrasound microbubble, Biomedical Optics Express, 4(9), 1559-1570, (2013); http://dx.doi.org/10.1364/BOE.4.001559
Presentations
Invited talk for Department of Electrical Engineering, University of Texas at Dallas, “High-resolution Imaging in Deep Media”
College of Engineering
Dean Khosrow Behbehani
Department of Civil Engineering
Chair Ali Abolmaali
Conference Papers
Wilson, A., and Abolmaali, A. (2013), “Comparison of Material Behavior of Steel and Synthetic Fibers in Dry Cast Application,” In Transportation Research Board 92nd Annual Meeting (No. 13-3925).
Conference Proceedings
Dezfooli, M., Abolmaali, A., Razavi M., “Staged Construction Modeling of a Large Diameter Steel Pipe Using 3-D Nonlinear Finite Element Analysis,” Transportation Research Board Conference, Washington D.C., January 2013.
Journal Articles
Siringi, G., Abolmaali, A., and Aswath, P., (2013), “Properties of Concrete with Crumb Rubber Replacing Fine Aggregates (Sand),” Advances in Civil Engineering Materials Journal, in press.
Wilson, A., and Abolmaali, A., (2013), “Comparison of Material Behavior of Steel and Synthetic Fibers in Dry Cast Application,” Transportation Research Record: Journal of the Transportation Research Board, in press.
Awards and Honors
Halliburton Excellence in Teaching Award
President's Award for Excellence in Teaching
The 2013 2nd Place Best Conferene Paper Award
Conference Proceedings
"A Feasibility Study for Converting HOV Lanes to Managed Lanes in Dallas, Texas," The 92nd Annual TRB Meeting, Session 294, Manuscript # 13-2012 in CD ROM, January 2013 (with K. Olyai).
"Is Distance Education Distant Education?," Proceedings of the 2013 ASEE Gulf-Southwest Annual Conference, The university of Texas at Arlington, March 21-23, 2013, in CD-ROM (Received the 2nd Place award in the Conference's best paper award competition).
Journal Articles
"Application of Ellipse for Horizontal Alignment," International journal of Computational Engineering Research, Vol. 3, No. 1, January 2013, PP. 35-51 (with F. Maniei).
Technical Reports
Small Business Inclusion: A Study of TxDOT's Consultant Procurement Program, TxDOT Research Report 48-2XX1A001, May 2013 (with K. Persad, N. Khwaja, R. Harrison, and L. Loftus-Otway).
Book Chapters
Abolfazl Zakersalehi, Joel Anderson, Hyeok Choi, and Dionysios D. Dionysiou, Photocatalytic Ceramic Membranes, pp. 963-983, in: Encyclopedia of Membrane Science and Technology, Volume 2: Methods of Membrane Preparation and Characterization and Design of Membrane Modules(Eds. E. Hoek, V. Tarabara), John Wiley & Sons, Hoboken, NJ, 2013.
Changseok Han, Hyeok Choi, Dionysios D. Dionysiou, Green Chemistry for Environmental Remediation, in: An Introduction to Green Chemistry Method(Eds. Rafael Ruque, Juan Carlos Comenares), Future Science Group, London UK, 2013.
Changseok Han, Joel Andersen, Suresh C. Pillai, Rachel Fagan, Polycarpos Falaras, Anthony Byrne, Patrick S.M. Dunlop, Hyeok Choi, Wenjun Jiang, Kevin O’Shea, and Dionysios D. Dionysiou, Green Nanotechnology: Development of Nanomaterials for Environmental and Energy Applications, pp. 201-229, in: Sustainable Nanotechnology and the Environment: Advances and Achievements(Ed. Virender Sharma and Najm Shamin), American Chemical Society, Washington, DC, 2013.
Changseok Han, Miguel Pelaez, Mallikarjuna Nadagouda, Sherine Obare, Ploycarpos Falaras, Patrick Dunlop, Anthony Byrne, Hyeok Choi, Dionysios D. Dionysiou, The Green Synthesis and Environmental Applications of Nanomaterials, pp. 106-143, in: Sustainable Preparation of Metal Nanoparticles: Methods and Applications(Eds. Rafael Luque and Rajenda Varma), RSC Green Chemistry No. 9, Royal Society of Chemistry, UK, 2013.
Hyeok Choi, Prince Nfodzo, Souhail R. Al-Abed, Shirish Agarwal, Dionysios D. Dionysiou, Activated Carbon-Supported Palladized Iron Nanoparticles: Applications to Contaminated Site Remediation, pp. 231-258, in: Nanotechnology for Water and Wastewater Treatment(Eds. P. Lens, J. Virkutyte, V. Jegatheesan, Seung Hyun Kim, S. Al-Abed, ISBN: 9781780404585), International Water Association, United Kingdom, 2013.
Miguel Pelaez, Changseok Han, Hyeok Choi, Virender Sharma, Anthony Byrne, Patrick Dunlop, George Romanos, Polycarpos Falaras, Dionysios Dionysiou, Nanotechnology: Environmental Applications, pp. 1712-1726, in: Encyclopedia of Environmetrics Second Edition(Eds. Abdel H. El-Shaarawi and Walter W. Piegorsch), John Wiley & Sons, Chickester, UK, 2013.
Prince Nfodzo, Dionysios D. Dionysiou, Hyeok Choi, Water Supply and Treatment, pp. 1712-1726, in: Encyclopedia of Environmetrics Second Edition (Eds. Abdel H. El-Shaarawi and Walter W. Piegorsch), John Wiley & Sons, Chichester, UK, 2013.
Conference Papers
Abolfazl Zakersalehi, Mallikarjuna Nadagouda, and Hyeok Choi, Controlling Porous Structure of TiO2 Photocatalysts for Preferential Decomposition of Ibuprofen, (Oral Presentation) atThe 46thAmerican Chemical Society (ACS) Dallas-Fort Worth Meeting in Miniature (MiM), April 27, 2013, Commerce, TX.
Abolfazl Zakersalehi and Hyeok Choi, Restraining the Physical Access of NOM into Nanostructured TiO2 Photocatalysts for Enhancing the Decomposition of Target Water Contaminants, (Oral Presentation) at Special Symposium On Heterogeneous Catalysis for Environmental and Energy Applications, The 246thAmerican Chemical Society (ACS) National Meeting, Sept. 8-12, 2013, Indianapolis, IN.
Abolfazl Zakersalehi and Hyeok Choi, Size Exclusion of Different NOM Fractions for Enhancing the Oxidation of Target Contaminants on Engineered TiO2, (Oral Presentation) at Special Symposium On Chemistry and Applications of Advanced Oxidation Processes for Removal of Contaminants of Emerging Concern, The 245thAmerican Chemical Society (ACS) National Meeting, April 7-11, 2013, New Orleans, LA.
Conference Proceedings
Abolfazl Zakersalehi, Mallikarjuna Nadagouda, Hyeok Choi, Inhibiting NOM access to porous TiO2 for enhancing decomposition of target water contaminants, (Oral Presentation) in: Extended Abstracts of the 2013 International Environmental Engineering Conference, June 11-13, 2013, Seoul, South Korea.
Journal Articles
Abolfazl Zakersalehi, Mallikarjuna Nadagouda, Hyeok Choi, Suppressing NOM Access to Controlled Porous TiO2 Particles Enhances the Decomposition of Target Water Contaminants. Catalysis Communications 41 (2013) 79-82.
Cecile Raillard, Valerie Hequet, Bifen Gao, Heyok Choi, Dionysios D. Dionysiou, Arnaud Marvilliers, Bertrand Illien, Correlations between Molecular Descriptors from Various Volatile Organic Compounds and Photocatalytic Oxidation Kinetic Constants (In Press: International Journal of Chemical Reactor Engineering).
Jurate Virkutyte, Souhail R. Al-Abed, Hyeok Choi, Christina Bennett-Stamper, Distinct Structural Behavior and Transport of TiO2 Nano- and Nanostructured Particles in Sand (In Press: Colloids and Surfaces A: Physicochemical and Engineering Aspects).
Lectures/Speeches
Hyeok Choi, From Sustainable Water Treatment to Reliable Quality Monitoring (Invited Lecture) in: Water and Energy Workshop at the 2013 International Environmental Engineering Conference, June 11, 2013, Seoul, South Korea.
Hyeok Choi, Nanotechnology in Environmental Engineering: Case Studies on Innovative Materials Development and Environmental Contaminant Cleanup (Seminar Presentation), in Environmental Engineering, Kangneung-Wonju National University, May 20-21, 2013, Gangneung, South Korea.
Hyeok Choi, Nanotechnology in Environmental Engineering: Case Studies on Innovative Materials Development and Environmental Contaminant Cleanup (Seminar Presentation), in Environmental Engineering, Pusan National University, May 23, 2013, Pusan, South Korea.
Abolfazl Zakersalehi, Mallikarjuna Nadagouda, Hyeok Choi, Selectivity Enhancement of TiO2–Based AOTs: NOM vs. Target Contaminants in Water (Invited Lecture) at The 19th International Conference on Advanced Oxidation Technologies for Water, Air and Soil, November 17-21, 2013, San Diego, CA, USA.
Poster Abstracts
Wasiu Lawal, Hyeok Choi, Selective Oxidation of Target Contaminants on Engineered Porous TiO2 Photocatalysts: Size Exclusion of NOM (Poster Presentation) at 2013 Annual Celebration of Excellence by Students Research Symposium, March 27, 2013, UT-Arlington, Arlington, TX.
Hesam Zamankhan and Hyeok Choi, Aggregation and Segregation Behavior of TiO2 Particles under Controlled Sonication (Poster Presentation) at The 246thAmerican Chemical Society (ACS) National Meeting, Sept. 8-12, 2013, Indianapolis, IN.
Prince Nfodzo and Hyeok Choi, Comparison between Sulfate Radicals and Hydroxyl Radicals for the Decomposition of Pharmaceuticals and Personal Care Products, (Poster Presentation) at Special Symposium On Occurrence, Detection, and Removal of Pharmaceutical and Personal Care Productsin Potable Water Sources, The 245thAmerican Chemical Society (ACS) National Meeting, April 7-11, 2013, New Orleans, LA.
Wasiu Lawal and Hyeok Choi, Integrated Decomposition of Perfluorooctanoic Acid by Nanoscale Zerovalent Iron Activated Oxidation (Poster Presentation) at The 246thAmerican Chemical Society (ACS) National Meeting, Sept. 8-12, 2013, Indianapolis, IN.
Journal Articles
Inequalities for variable interest rates, Journal of Economics and Engineering,Vol. 4, No.2, December 2013, Co-author Alireza Norozirshan
Presentations
City of Corpus Christi
City of Corpus Christi, Texas. Budget: $311,000. Title: “Instrumentation and Performance Monitoring of Leachate Recirculation Systems in ELR Landfill” PI: MD Sahadat Hossain, Co-PI: Melanie Sattler. Project Duration: January 2013- December 2015 (Project Approved waiting for Final Execution).
Conference Proceedings
Chaurasia, B., Tavakoli, H., Najafi, M., Williammee, R. and Daniel, A. (2013). "Productivity Case Study of Box Jacking for Culvert Installations." Proceedings of ASCE Pipelines Conference 2013, June 22 - 26, 2013, Fort Worth, TX.
Ghasemi-Motlagh, S., Jain, A. and Najafi, M. (2013)."Comparison of Spray-on Linings for Water Pipeline Renewal Applications and Current Research on Polyurea." Proceedings of ASCE Pipelines Conference 2013, June 22 - 26, 2013, Fort Worth, TX.
Paradkar, A., Venkatesh, C., Deshmukh, P., Manda, R., Joshi, T. and Najafi, M. (2013)."Exploring Pipe Materials for 24 in. and Larger Diameter Water Pipes." Proceedings of ASCE Pipelines Conference 2013, June 22 - 26, 2013, Fort Worth, TX.
Rahjoo, S., Najafi, M., Williammee, R., Khankarli, G., and Daniel, A. (2013). "Lesson Learned form Box Jacking Project from Dallas, TX." Proceedingsof NASTT No-dig 2013, March 3 - 7, 2013, Sacramento, CA.
Sharma, J. R., Najafi, M., Marshall, D., and Jain, A. (2013). "Thin-walled Large Diameter Steel Pipe Response to Various Embedment Conditions." Proceedings of ASCE Pipelines Conference 2013, June 22 - 26, 2013, Fort Worth, TX.
Journal Articles
Sharma, J., Najafi, M. and Qasim, S. (2013). “Preliminary Cost Estimation Models for Construction, and Operation and Maintenance Costs of Water Treatment Plants.” ASCE Journal of Infrastructure Systems.
Conference Proceedings
Srinivas Prabakar, Andrew Kruzic, Thomas Chrzanowski and Raymond Jones, A Proposed Rapid Enumeration Technique in the Determination of Assimilable Organic Carbon in Water, Biological Treatment Symposium, AWWA, Denver, Coloado, March 2013
Conference Proceedings
Romanoschi S.A., Intaj F., Bendana L. J., “Identification of Patterns for the Traffic Inputs to the Mechanistic-Empirical Pavement Design Guide in New York State”. Proceedings of the 92th Annual TRB Meeting., Washington, DC, January 12-17, 2013
Awards and Honors
Faculty Sustainability Fellowship – 2013-2014
Conference Proceedings
Athappan, Anna; Sattler, Melanie. “Selective Catalytic Reduction of Nitric Oxide over Cerium-Doped Activated Carbons.” Extended Abstract, Proceedings of the Air & Waste Management Association 106th Annual Conference. Chicago, Illinois. June 2013.
Eapi, Gautam; Manry, Michael; Sattler, Melanie. “Neural Network Forecasting of Ozone.” Extended Abstract, Proceedings of the Air & Waste Management Association 106th Annual Conference. Chicago, Illinois. June 2013.
Eapi, Gautam; Sabnis, Madhu; Sattler, Melanie. “Mobile Measurement of Methane and Hydrogen Sulfide at Natural Gas Production Site Fence Lines in the Texas Barnett Shale.” Proceedings of the Air & Waste Management Association 106th Annual Conference. Chicago, Illinois. June 2013.
Gangupomu, R. H.; Ramirez, David; Sattler, M. L. “Characterization of Physical/Chemical Properties of Carbon Nanotubes and Granular Activated Carbon.” Proceedings of the Air & Waste Management Association 106th Annual Conference. Chicago, Illinois. June 2013.
Graham, Andrea; Rogers, Jamie; Sattler, Melanie. “Assessing Life Cycle Sustainability in Engineering Economics.” Proceedings of the Industrial and Systems Engineering Research Conference, May 18-22, 2013, San Juan, Puerto Rico.
Sattler, Melanie. “Benefits of Service-Learning in Meeting Learning Objectives: Examples from Air Pollution/Environmental Engineering Courses.“ Proceedings of the American Society for Engineering Education (ASEE) Gulf-Southwest Annual Conference, University of Texas at Arlington, March 2013.
Senkayi, Sala; Sattler, Melanie. “The Importance of Varying Spatial Levels in GIS Analysis of Environmental Epidemiological Data.” Extended Abstract, Proceedings of the Air & Waste Management Association 106th Annual Conference. Chicago, Illinois. June 2013.
Journal Articles
Afotey, Benjamin; Sattler, Melanie; Mattingly, Stephen P.; Chen, Victoria C.P. “Statistical Model for Estimating Carbon Dioxide Emissions from a Light-Duty Gasoline Vehicle.” Journal of Environmental Protection. Vol. 4, No. 8A, August 2013 (Special Issue on Air Pollution), pp. 8-15, http://file.scirp.org/Html/2-6701889_35596.htm.
Athappan, Anna; Sattler, Melanie. “A Comparison of Bituminous Coal-Based and Coconut Shell-Based Activated Carbon for Removal of Trace Hazardous Air Pollutants in Landfill Gas.” Journal of Civil Engineering and Urbanism. Vol. 3, No., 6, Nov. 2013, pp. 331-337, http://www.ojceu.ir/main/attachments/article/28/J.%20Civil%20Eng.%20Urban.,49-331-337.pdf .
Athappan, Annaprabha; Sumitsawan, Sulak; Gangupomu, Roja Haritha; Kositkanawuth, Ketwalee; Parikh, Parthen; Afotey, Benjamin; Sule, Neelesh; Kalidindi, Sahithi Raj; Sattler, Melanie L.; Weatherton, Yvette Pearson. “Volatile Organic Compound Emissions from Surface Coating Facilities: Characterization of Facilities, Estimation of Emission Rates, and Dispersion Modeling of Off-Site Impacts.” Journal of Environmental Protection, Vol. 4, No. 8A1, August 2013 (Special Issue on Air Pollution), pp. 123-141, http://www.scirp.org/journal/JEP/ .
Bhatt, Hetal; Sattler, Melanie; Mattingly, Steve. “Determination of Safe Roadway Buffer Width to Protect Human Health from NO2 Exposure: A Case Study.” Journal of Civil & Environmental Engineering, Vol. 3, No. 1, Sept. 2013, http://dx.doi.org/10.4172/2165-784X.1000126 .
Natchanok, Pala En; Sattler, Melanie; Dennis, Brian H.; Chen, Victoria C.P.; Muncrief, Rachel L. “On-RoadMeasurement of NOx and CO2 Emissions from Biodiesel Produced from Different Feedstocks.” Journal of Environmental Protection. Vol. 4, No. 8A1, August 2013 (Special Issue on Air Pollution), pp. 74-82, http://www.scirp.org/journal/JEP/ .
Upadhyay, Mita; Sattler, Melanie. “Photocatalytic Degradation of Air Emissions from Municipal Solid Waste Landfills.” Journal of Civil Engineering and Urbanism. Vol. 3, No. 4, July 2013, pp. 128-135, http://www.ojceu.ir/main/attachments/article/26/JCEU-C3-21.pdf .
Lectures/Speeches
Sattler, Melanie. “Mobile Measurement of Methane and Hydrogen Sulfide at Natural Gas Production Site Fence Lines in the Texas Barnett Shale,” University of Texas at Tyler Environmental Science Seminar, March 29, 2013.
Sattler, Melanie. “Sustainable Engineering and Technology: Opportunities for the Future.” Sustainability Day speaker, Mountain ViewCollege, Dallas, TX, October 23, 2013.
Poster Abstracts
Rahman, Shammi; Sabnis, Madhu; Sattler, Melanie. “Development of Linear Regression Models for Predicting Water Quality Parameters from Anaerobic Treatment of Vinasse.” Student poster, UT Arlington Annual Celebration of Excellence by Students (ACES), March 27, 2013.
Presentations
Mobile Measurement of Methane and Hydrogen Sulfide at Natural Gas Production Site Fence Lines in the Texas Barnett Shale
From Trash to Treasure: Waste as a Renewable Energy Resource
Sustainable Engineering and Technology: Opportunities for the Future
Book Chapters
Weerts, A., D.-J. Seo, M. Werner, and J. C. Schaake, Operational hydrologic ensemble forecasting, chapter to appear in Applied Uncertainty Analysis for Flood Risk Management, K. Beven and J. Hall, Editors.
Journal Articles
Hou, D., M. Charles, Y. Luo, Z. Toth, Y. Zhu, R. Krzysztofowicz, Y. Lin, P. Xie, D.-J. Seo, M. Pena, and B. Cui. Climatology-Calibrated Precipitation Analysis at Fine Scales: Statistical Adjustment of STAGE IV towards CPC Gauge-Based Analysis, submitted to Journal of Hydrometeorology.
Yuqiong Liu1,2,*, Albrecht H. Weerts3, Martyn Clark4, Harrie-Jan Hendricks Franssen5, Sujay Kumar6,2, Hamid Moradkhani7, Dong-Jun Seo8, Dirk Schwanenberg3, Paul Smith9, Albert van Dijk10, Nils van Velzen11, Minxue He12,13, Haksu Lee12,14, Seong Jin Noh15, Olda Rakovec16, and Pedro Restrepo12 Toward Advancing Data Assimilation in Operational Hydrologic Forecasting and Water Resources Management: A Review of the Current Status, Challenges, and Emerging Opportunities, accepted for publication in Special Issue on Latest Advances and Developments in Data Assimilation for Operational Hydrologic Forecasting and Water Resources Management, Hydrology and Earth Systems Sciences.
Zhang, Y., D.-J. Seo, D. Kitzmiller, H. Lee, R. Kuligowski, D. Kim and C. Kondragunta. A Comparative Evaluation of SCaMPR Satellite QPEs vs. Gridded Gauge-Only Analyses, submitted to Journal of Hydrometeorology.
Conference Proceedings
Asgarieh, E., B. Moaveni, and A. Stavridis. “Nonlinear Finite Element Model Updating of a Large-Scale Infilled Frame Structures Based on Instantaneous Modal Parameters.” Proc. of IMAC XXXI -Engineering Nonlinearities in Structural Dynamics. Orange County, California, February 2013.
Journal Articles
Athappan, Annaprabha; Sumitsawan, Sulak; Gangupomu, Roja Haritha; Kositkanawuth, Ketwalee; Parikh, Parthen; Afotey, Benjamin; Sule, Neelesh; Kalidindi, Sahithi Raj; Sattler, Melanie; Pearson Weatherton, Yvette. Volatile Organic Compound Emissions from Surface Coating Facilities: Characterization of Facilities, Estimation of Emission Rates, and Dispersion Modeling of Off-Site Impacts. Journal of Environmental Protection, 2013.
Journal Articles
Chao, S. H.; Cho, J. S.; Karki, N. B.; Sahoo, D. R.; Yazdani, N. FRC Performance Comparison: Uniaxial Direct Tensile Test, Third Point Bending Test and Round Panel Test. ACI Special Publication.
Enam, M.; Mtenga, P.; Tawfiq, K.; Yazdani, N. Fatigue Behavior of SCL T-Beam Bridge Girders. ASCE Journal of Performance of Constructed Facilities.
Tawfiq, K.; Robinson, B.; Yazdani, N. Use of Steel Fiber Reinforced Concrete in Anchorage Zone of Post Tensioned Concrete Girders. ACI Special Publication.
Journal Articles
Xinbao Yu; Murad Abu-Farsakh; Sungmin Yoon; Ching Tsai; Zhongjie Zhang. Implementation of LRFD Design of Drilled Shafts in Louisiana. Journal of Infrastructure Systems.
College of Engineering
Dean Khosrow Behbehani
Department of Computer Science and Engineering
Chair Lynn Peterson
Book Chapters
Y. L. Ahmad. "Power-Aware Video Compression for Mobile Environments," Pervasive Communication Handbook, S. I. Ali, M. I. Shah, and H. Mouftah, Eds. , CRC Press.
Journal Articles
A Theoretical Analysis of Scalability of the Parallel Genome Assembly Algorithms
I. A. Ahmed and S. U. Khan. "A Comparative Analysis of Approaches to Parallel Genome Assembly," Interdisciplinary Sciences: Computational Life Sciences,.
S. U. Khan and I. Ahmad. "Replicating Data Objects in Large Distributed Database Systems: An Axiomatic Game Theoretical Mechanism Design Approach," Distributed and Parallel Databases,.
Awards and Honors
ACM TOSEM Distinguished Referee
Conference Papers
Automatic profiling of evasive mixed-mode malware with SEMU. By Shabnam Aboughadareh, Christoph Csallner, and Mehdi Azarmi. In 33rd IEEE Symposium on Security and Privacy, Poster session. May 2013.
GROPG: A graphical on-phone debugger. By Tuan A. Nguyen, Christoph Csallner, and Nikolai Tillmann. In Proc. 35th ACM/IEEE International Conference on Software Engineering, New Ideas and Emerging Results (NIER) track, pages 1189-1192. IEEE, May 2013.
SEDGE: Symbolic example data generation for dataflow programs. By Kaituo Li, Christoph Reichenbach, Yannis Smaragdakis, Yanlei Diao, and Christoph Csallner. In Proc. 28nd IEEE/ACM International Conference on Automated Software Engineering, pages 235-245. IEEE, November 2013.
Book Chapters
1. N. Li and S. K. Das, “Applications of k-Anonymity and l-Diversity in Publishing Online Social Networks,” in Security and Privacy in Social Networks (eds. Y. Altshuler, Y. Elovici, A. Cremers, N. Aharony, and A. Pentland), Chapter 8, pp. 153-180, Springer, 2013.
Books
• S. K. Das and K. Basu, Mobile Wireless Computing: A Quantitative Approach, Springer (in preparation).
Conference Proceedings
1. S. Datta and S. K. Das, “Performance Analysis of Real-Time Traffic in Wi-Fi Networks: A Markov Chain-Based Approach,” IEEE Wireless Communications and Networking Conference (WCNC), Shanghai, China, Apr 7-10, 2013.
2. S. K. A. Imon, A. Khan, M, Di Francesco, and S. K. Das, “RaSMaLai: A Randomized Switching Algorithm for Maximizing Lifetime in Tree-based Wireless Sensor Networks,” Proceedings of 32nd IEEE International Conference on Computer Communications (INFOCOM’2013), Turin, Italy, Apr 14-19, 2013.
3. A. Nazi, M. Raj, M. Di Francesco, P. Ghosh and S. K. Das, “Robust Deployment of Wireless Sensor Networks using Gene Regulatory Networks,” Proceedings of International Conference on Distributed Computing and Net- working (ICDCN), Mumbai, India, Jan 3-6, 2013.
4. A. Khan, M. Shahriar, S. K. A. Imon, M. Di Francesco, and S. K. Das “PeerVault: A Distributed Peer-to-Peer Platform for Reliable Data Backup,” Proceedings of International Conference on Distributed Computing and Networking (ICDCN), Mumbai, India, Jan 3-6, 2013.
Editorial Roles
Journal Editorships
Associate Editor: IEEE Transactions on Mobile Computing (2003--) ACM/Kluwer Wireless Networks Journal (2002--)
Journal Articles
1. V. Gardellin, S. K. Das, and L. Lenzini, “Self-Coexistence in Cellular Cognitive Radio Networks based on the IEEE 802.22 Standard,” IEEE Wireless Communications (special issue on cellular radios), to appear, 2013.
10. N. Li and S. K. Das, “A Trust-based Framework for Data Forwarding in Opportunistic Networks,” Ad Hoc Networks (Special Issue on Wireless Communication in Challenged Environments, Guest Eds: M. C. Vuran, W. Heinzelman, et al.), to appear, 2013.
2. H. Zhou, J. Chen, J. Fan, Y. Du, and S. K. Das, “ConSub: Incentive-Based Content Subscribing in Selfish Opportunistic Mobile Networks,” IEEE Journal on Selected Areas in Communications (JSAC Special Issue on Emerging Technologies in Communications. Congratulations), to appear, 2013.
3. N. Li, M. Raj, D. Liu, M. Wright, and S. K. Das, “Using Data Mules to Preserve Source Location Privacy in Wireless Sensor Networks,” Pervasive and Mobile Computing, to appear, 2013.
4. V. Gardellin, S. K. Das and L. Lenzini, “Coordination Problem in CognitiveWireless Mesh Networks,” Pervasive and Mobile Computing, to appear, 2013.
5. Y. Yen, R. Hu, Y. Qian, S. K. Das, and H. Sharif, “An Efficient Security Protocol for Advanced Metering Infrastructure in Smart Grid,” IEEE Network, to appear, 2013.
6. Y. Xu, F. Ren, T. He, C. Lin, C. Chen, and S. K. Das, “Real-time Routing in Wireless Sensor Networks: A Potential Field Approach,” ACM Transactions on Sensor Networks, to appear, 2013.
7. U. K. Chakraborty, T. E. Abbott, and S. K. Das, “PEM Fuel Cell Modeling using Differential Evolution,” Energy, to appear, 2013.
8. G. Ghidini and S. K. Das, “Energy-efficient Markov Chain-based Duty Cycling Schemes for Greener Wireless Sensor Networks,” ACM Journal of Emerging Technologies in Computing Systems (Special Issue on Sustainable and Green Computing Systems), to appear 2013.
9. S. Ghosh, P. Ghosh, K. Basu, S. K. Das, and S. Daefler, “A Discrete Event based Stochastic Simulation Platform for ‘in silico’ Study of Single Cell Molecular Dynamics,” Journal of Biotechnology and Biomaterials, to appear, 2013.
S. K. Das and K. Basu, Mobile Wireless Computing: A Quantitative Approach, Springer (in preparation).
Book Chapters
C. Ann, J. L. Ratanamahatana, E. K. Gunopulos, M. Vlachos, and G. Das. "Mining Time Series Data," Data Mining and Knowledge Discovery Handbook: A Complete Guide for Practitioners and Researchers, vol. 2005, O. Maimon, Eds. Kluwer Academic Publishers.
G. Das. "Sampling Methods in Approximate Query Answering Systems," Encyclopedia of Data Warehousing and Mining, vol. 2005, J. Wang, Eds. Information Science Publishing.
Book Chapters
with F.Ji and J.Fu. Applying Multi-level Conceptual Modeling in a Prototype System for Biomedical Data and Ontologies Integration. In . under review for Biological Data and Applications.
Journal Articles
K.Taha. A Framework for Enhancing Non Context-Driven XML Search. accepted for publication in Journal of Digital Information Management (JDIM)..
SGPProfile: Speak Group Profiling, with K.Taha. accepted for publication in Journal of Information Systems..
Conference Proceedings
Lin Zhong, Shaoting Zhang, Mingchen Gao, Junzhou Huang, Zhen Qian, Dimitris Metaxas and Leon Axel, "Papillary Muscles Analysis from High Resolution CT using Spatial-Temporal Skeleton Extraction", In Proc. of the IEEE International Symposium on Biomedical Imaging, ISBI'13, San Francisco, CA, USA, April 2013
Xiang Yu, Fei Yang, Junzhou Huang and Dimitris Metaxas, "Explicit Occlusion Detection based Deformable Fitting for Facial Landmark Localization", In Proc. of the IEEE International Conference on Automatic Face and Gesture Recognition, FG'13, Shanghai, China, April 2013
Xiang Yu, Shaoting Zhang, Zhennan Yan, Fei Yang, Junzhou Huang, Norah Dunbar, Matthew Jensen, Judee K. Burgoon and Dimitris N. Metaxas, "Is Interactional Dissynchrony a Clue to Deception: Insights from Automated Analysis of Nonverbal Visual Cues", In Proc. of the 46th Hawaii International Conference on System Sciences, HICSS'13, Wailea, HI, USA, January 2013.
Yang Yu, Shaoting Zhang, Junzhou Huang, Dimitris Metaxas and Leon Axel, "Sparse Deformable Models with Application to Cardiac Motion Analysis", In Proc. of the 23rd biennial International Conference on Information Processing in Medical Imaging, IPMI'13, Asilomar, CA, June 2013.
Journal Articles
Baiyang Liu, Junzhou Huang, Casimir Kulikowski, Lin Yang, “Robust Visual Tracking Using Local Sparse Appearance Model and K-Selection”, Accepted by IEEE Transactions on Pattern Analysis and Machine Intelligence.
Shaoting Zhang, Yiqiang Zhan, Xinyi Cui, Mingchen Gao, Junzhou Huang, Dimitris Metaxas, "3D Anatomical Shape Atlas Construction using Mesh Quality Preserved Deformable Models", Computer Vision and Image Understanding, Special Issue onShape Modeling in Medical Image, 2013.
Editorial Roles
Academic Committees
Member of the Editorial Board of International Journal of Computational Biology and Drug Design, 2008-present.
Academic Committees
Member of the Editorial Board of International Journal of Functional Informatics and Personalised Medicine, 2008-present.
Conference Papers
H. Janzadeh and M. Huber. "Learning Policies in Partially Observable MDPs with Abstract Actions Using Value Iteration", To appear in Proceedings of the 26th International FLAIRS Conference (FLAIRS'13), St. Pete Beach, 2013.
M. Aurangzeb, F.L. Lewis, M. Huber. "Efficient, Swarm-Based Path Finding in Unknown Graphs Using Reinforcement Learning", To appear in Proceedings of the 10th IEEE International Conference on Control & Automation (ICCA 2013), Hangzhou, China, 2013.
Conference Proceedings
R. Su, T.M. Dockins, and M. Huber. "ICA Analysis of Face Color for Health Applications", To appear in Proceedings of the 26th International FLAIRS Conference (FLAIRS'13), St. Pete Beach, FL, 2013.
Awards and Honors
Yi-Min Wang and Pi-Yu Chung Research Award
Conference Papers
Sergiy Bogomolov, Alexandre Donze, Goran Frehse, Radu Grosu, Taylor T. Johnson, Hamed Ladan, Andreas Podelski, Martin Wehrle, "Abstraction-Based Guided Search for Hybrid Systems", In Proceedings of the 20th International SPIN Symposium on Model Checking of Software (SPIN 2013), Stony Brook, New York, USA, July 2013.
Shamina Hossain, Sairaj Dhople, Taylor T. Johnson, "Reachability Analysis of Closed-Loop Switching Power Converters", In Proceedings of the 4th IEEE Power and Energy Conference at Illinois (PECI 2013), Urbana, Illinois, USA, February 2013.
Taylor T. Johnson, Sayan Mitra, "Invariant Synthesis for Verification of Parameterized Cyber-Physical Systems with Applications to Aerospace Systems", In Proceedings of the AIAA Infotech at Aerospace Conference (AIAA Infotech 2013), AIAA, vol. , Boston, MA, August 2013.
Journal Articles
Kunal Shah, Mario Di Francesco, and Mohan Kumar, Distributed Resource Management in Wireless Sensor, Networks using Reinforcement Learning, accepted for publication, Springer’s Wireless Networks (WINET).
V. Raychoudhury, J. Cao, M. Kumar and D. Zhang, Middleware for Pervasive Computing: A Survey, accepted for publication, Elsevier’s Pervasive and Mobile Computing.
Book Chapters
C. David, H. B. Kung, R. Shah, and G. Pancholi. "An expert system for suggesting design patterns: a methodology and a prototype," Software Engineering With Computational Intelligence, T. M. Khoshgoftaar, Eds. Kluwer International.
Books
Object-Oriented Software Engineering: An Agile Unified Methdology, McGraw-Hill Higher Education, 2013. ISBN: 978-0073376257.
Conference Proceedings
David Kung, "On use case identification," Proceedings of 25th International Conference on Software Engineering and Knowledge Engineering, Boston, USA, June 26-29, 2013.
Laleh Shikh Gholamhossein Ghandehari, Yu Lei, David Kung, Raghu Kacker and Richard Kuhn, "Fault Localization Based on Failure-Inducing Combinations," Proceedings of 24th International Symposium on Software Reliability Engineering, Pasadena, CA, USA, November 4-7, 2013.
Journal Articles
David Kung, "Object-Oriented Software Engineering: An Agile Unified Methodology," McGraw-Hill Higher Education, 2013.
Lectures/Speeches
David Kung, "Agile Methods and Patterns," tutorial to be presented at the 28th IEEE/ACM International Conference on Automated Software Engineering, Palo Alto, California, USA, November 11-15, 2013.
David Kung, "Agile Methods, Patterns, and Software Quality," tutorial to be presented at the 24th International Symposium on Software Reliability Engineering, Pasadena, CA, USA, November 4-7, 2013.
Conference Papers
Wiki3C: Exploiting Wikipedia for Context-aware Concept Categorization. P. Jiang, Huiman Hou, Lijiang Chen, Shimin Chen, Conglei Yao, Chengkai Li, Min Wang. In Proceedings of the 6th ACM International Conference on Web Search and Data Mining (WSDM), pages -, Rome, Italy, February 2013
Journal Articles
On Contextual Ranking Queries in Databases. Chengkai Li. In Information Systems, accepted at January 3, 2013, in preprint.
Personalized Ranking in Web Databases: Establishing and Utilizing an Appropriate Workload. Aditya Telang, Sharma Chakravarthy, Chengkai Li. In Distributed and Parallel Databases (DPD), 31(1):47-70, March 2013.
Journal Articles
De, Y. L.; Das, S. K. An Epidemic Theoretic Framework for Vulnerability Analysis of Broadcast Protocols in Wireless Sensor Networks. IEEE Transactions on Mobile Computing.
De, Y. L.; Das, S. K. Deployment aware modeling of node compromise spread in wireless sensor networks using epidemic theory. ACM Transactions on Sensor Networks.
Luo, Y. L.; Das, S. K. Distributed algorithm for enroute aggregation decision in wireless sensor networks. IEEE Transactions on Mobile Computing.
Journal Articles
Becker, Y. X.; Huang, H.; Makedon, F. Requirements for Implementation of Localization into Real-World Assistive Environments. Special Issue on Pervasive Technologies for Assistive Environments - Personal and Ubiquitous Computing.
Makedon, Z. L.; Huang, I. M.; Doukas, C. Digital Cities of the Future: Extending @Home Assistive Technologies. Digital Cities, TELEMATICS AND INFORMATICS An Interdisciplinary Journal on the Social Impacts of New Technologies.
Presentations
College of Engineering K-12 Outreach
The UT Arlington College of Engineering is committed to offering engineering outreach programs to our community and to potential engineering and computer science students. These programs showcase what engineering is all about and offer young students the chance to see how fun and exciting engineering can be. Please visit our website for more information about these programs.
Engineering Saturdays
The College of Engineering offers free one-day Saturday events to excite students about engineering. See the website for details of how to participate.
Engineering Summer Programs
The UT Arlington College of Engineering offers summer camps for future engineering and computer science students. These camps give students a chance to try out engineering and have fun! Please visit our website for more information about these programs. http://www.uta.edu/engineering/summer_programs
Conference Papers
Prateek Mittal, Nikita Borisov, Matthew Wright. “Pisces: Anonymous communication using social networks”. Proc. ISOC Network and Distributed System Security Symposium (NDSS). Feb. 2013.
Journal Articles
Kush Kothari and Matthew Wright, "Mimic: An active covert channel that evades regularity-based detection," Computer Networks (Elsevier). Vol. 57, No. 3, Feb. 2013.
Qi Dong, Donggang Liu, and Matthew Wright, "Mitigating Jamming Attacks in Wireless Broadcast Systems with Unpredictable Channel Assignment" ACM/Springer Journal on Wireless Networks (WINET), Accepted Feb. 2013.
Journal Articles
A. Thor, G. Záruba, D. Levine, “Auctioning Mechanism for Grid Scheduling and ResourceAllocation,” Under submission to Communications and Network.
M. Elahi, G. Záruba, J. Rosenberger, “Modeling and Simulation of a General MotorsConveyor System Using a Custom Decision Optimizer,” Under submission to OMEGATheInternational Journal of Management Science.
College of Engineering
Dean Khosrow Behbehani
Department of Electrical Engineering
Chair Jonathan Bredow
Conference Proceedings
Bhargav Nabar, Zeynep Celik-Butler, and Donald P. Butler, "Self-Powered, Tactile Pressure Sensing Skin using Crystalline ZnO Nanorod Arrays for Robotic Applications," to be presented at the 2013 IEEE Sensors Conference, 4-6 Nov. 2013, Baltimore, MD. Conference Proceedings.
Md Muztoba, Donald Butler, Noureddine Melikechi, and Mukti Rana, "Nanomachined Pyroelectric Detector with Low Thermal Conductance – Design and Concepts," to be presented at the 2013 IEEE Sensors Conference, 4-6 Nov. 2013, Baltimore, MD. Conference Proceedings
Yi Li, Zeynep Celik-Butler, and Donald P. Butler, "Design and Optimization of an Electrostatic Micro-Harvester for Sensors Applications," to be presented at the 2013 IEEE Sensors Conference, 4-6 Nov. 2013, Baltimore, MD. Conference Proceedings
Journal Articles
Moinuddin Ahmed and Donald P. Butler, "Flexible Substrate and Release Layer for Flexible MEMS Devices", Journal of Vacuum Science and Technology B. 31(5), 050602 Sep/Oct 2013. http://dx.doi.org/10.1116/1.4816938. (Top 20 downloaded paper from JVST-B in Aug. 2013.)
Moinuddin Ahmed and Donald P. Butler, “High pyroelectric coefficient modified lead titanate thin films using gold electrodes,” Electronics Letters 49, pp. 952-953 (2013).
Moinuddin Ahmed, Murali Chitteboyina, Donald P. Butler, and Zeynep Celik-Butler, “Micromachined Force Sensor in a Flexible Substrate,” IEEE Sensors Journal: Special Issue on Flexible Sensors and Sensing Systems 13, pp. 4081-4089 (2013) . published online 15 July 2013.
Rohit Kilaru, Zeynep Celik-Butler, Donald P. Butler, and Ismail Erkin Gönenli, “NiCr MEMS Tactile Sensors Embedded in Polyimide, Towards a Smart Skin,” IEEE/ASME Journal of Microelectromechanical SystemsSystems 22, pp. 349-355 (2013).
Patents
Method and Apparatus for Fabricating Piezoresistors by Aluminum Induced Crystallization. Patent No. 8,492,238
The present invention provides a method and apparatus for fabricating piezoresistive polysilicon on a substrate by low-temperature metal induced crystallization by: (1) providing the substrate having a passivation layer; (2) performing, at or near room temperature in a chamber without breaking a vacuum or near-vacuum within the chamber, the steps of: (a) creating a metal layer on the passivation layer, and (b) creating an amorphous silicon layer on the metal layer, wherein the metal layer and the amorphous silicon layer have approximately the same thickness; (3) annealing the substrate, the passivation layer, the metal layer and the amorphous silicon layer at a temperature equal to or less than 600° C. and a period of time equal to or less than three hours to form a doped polysilicon layer below a residual metal layer; and (4) removing the residual metal layer to expose the doped polysilicon layer.
Method and Apparatuses for Integrated Packaging of Microelectromechanical Devices. Patent No. 8,557,623
Microelectromechanical systems (MEMS) packages, packaged MEMS devices, and methods for making the same are disclosed. The method may include forming a chamber sacrifcial layer above an insulating layer that is coupled to a Wafer. The method further may include forming a packaging layer above the chamber sacrifcial layer. The method additionally may include forming one or more openings through the packaging layer. The method also may include removing the chamber sacrifcial layer through the one or more open ings. The method may include forming a sealing layer above the packaging layer such that the sealing layer substantially seals the one or more openings to form a hermetic cavity.
Book Chapters
“MEMS on Flexible Substrates,” Z. Celik-Butler and D. P. Butler, Encyclopedia of Nanotechnology, to be published.
Conference Papers
A. Bidram and A. Davoudi, "Hierarchical structure of microgrids control system," IEEE Power and Energy general Meeting, 2013.
Conference Proceedings
A. Bidram, A. Davoudi, and F. L. Lewis, “Distributed control of AC shipboard power systems,” IEEE Electric Ship Technologies Symposium, 2013, pp. 282-286.
A. Bidram, A. Davoudi, and F. Lewis, “Two-layer distributed cooperative control of multi-inverter microgrids,” in press, IEEE Applied Power Electronics Conf. and Expo, Sept 2013, (Paper ID: 1493).
A. Bidram, F. Lewis, A. Davoudi, and J. Guerrero, “Distributed cooperative control of nonlinear and non-identical multi-agent systems,” in proc. Mediterranean Conf. Control and Automation, 2013, pp. 770-775.
A. Bidram, F. Lewis, A. Davoudi, and Z. Qu, “Frequency control of electric power microgrids using distributed cooperative control of multi-agent systems,” Invited for IEEE Cyber 2013, (Confirmation Number: 1333).
A. Bidram,F. L. Lewis, A. Davoudi, and S. S. Ge, “Adaptive and distributed control of nonlinear and heterogeneous multi-agent systems,” IEEE Control and Decision, Accepted in July 2013, (Paper No: 506).
G. Binetti, M. Abouheaf, F. Lewis, D. Naso, A. Davoudi, and B. Turchiano, “Distributed solution for the economic dispatch problem,” in proc. Mediterranean Conf. Control and Automation, 2013, pp. 243-250.
H. Behjati, A. Davoudi, and F. Lewis, “Distributed multi-agent control of parallel Cuk converters using feedback linearization,” in press, IEEE Applied Power Electronics Conf. and Expo, Sept 2013, (Paper ID: 1269).
H. Behjati, A. Davoudi, and Reza Ahmadi, “Sculpting the dynamic response of PWM Dc-Dc converters in an arbitrary shape using WPI control technique,” IEEE Electric Ship Tech Symp, 2013, pp. 147-151.
H. Behjati and A. Davoudi, “Discrete-time modeling of multiple-input DC energy conversion systems,” IEEE Electric Ship Technology Symposium, 2013, pp. 66-70.
H. Behjati and A. Davoudi, “Power budgeting between diversified energy sources and loads using a multiple-input multiple-output dc-dc converter,” in proc. 49th IEEE Industrial and Commercial Power Systems Technical Conference, 2013, pp. 1-12.
H. Mohsenian-Rad and A. Davoudi, “Optimal demand response in DC distribution networks,” IEEE International Conf. on Smart Grid Communication, Accepted in July 2013, (Manuscript ID: 1569777837).
H. Mohsenian-Rad and A. Davoudi, “Optimal demand response in DC distribution networks,” IEEE International Conference on Smart Grid Communication, Accepted in July 2013, (Manuscript ID: 1569777837).
S. Abhinav, G. Binetti, A. Davoudi, and F. Lewis, “Toward consensus-based balancing of smart batteries,” in press, IEEE Applied Power Electronics Conf. and Expo, Sept 2013, (Paper ID: 1184).
S. Moayedi and A. Davoudi, “Distributed cooperative load sharing in parallel dc-dc converters,” in press, IEEE Applied Power Electronics Conf. and Exposition, Sept 2013, (Paper ID: 1454).
V. Nasirian, A. Davoudi, and F. Lewis, “Distributed adaptive droop control for DC microgrids,” in press, IEEE Applied Power Electronics Conf. and Exposition, Sept 2013, (Paper ID: 1144).
A. Bidram,F. L. Lewis, A. Davoudi, and S. S. Ge, “Adaptive and distributed control of nonlinear and heterogeneous multi-agent systems,” IEEE Control and Decision, in press, July 2013, (Paper No: 506).
Journal Articles
A. Bidram, A. Davoudi, F. Lewis, and J. Guerrero, “Distributed cooperative secondary control of microgrids using feedback linearization,” IEEE Trans. Power Systems, vol. 28, pp. 3462-3470, Aug. 2013.
A. Bidram, A. Davoudi, F. Lewis, and Z. Qu, “Secondary control of microgrids based on distributed cooperative control of multi-agent systems,” IET Generation, Transmission and Distribution, vol. 7, pp. 822-831, Aug. 2013.
A. Davoudi, P. L. Chapman, J. Jatskevich, and A. Bidram, “Multi-resolution modeling of power electronics circuits using model-order reduction techniques,” IEEE Trans. Circuits and Systems, vol. 60, pp. 810-823, March 2013.
A. Davoudi, P. L. Chapman, J. Jatskevich, and A. Bidram, “Multi-resolution modeling of power electronics circuits using model-order reduction techniques,” IEEE Trans. Circuits and Systems, vol. 60, pp. 810-823, March 2013.
G. Binetti, A. Davoudi, D. Naso, B. Turchiano, and F. Lewis, “A distributed auction-based algorithm for the non-convex economic dispatch problem,” IEEE Trans. Industrial Informatics, Accepted, Oct. 2013, DOI: 10.1109/TII.2013.2287807.
G. Binetti, A. Davoudi, D. Naso, B. Turchiano, and F. Lewis, “A distributed auction-based algorithm for the non-convex economic dispatch problem,” IEEE Trans. Industrial Informatics, Accepted, Oct. 2013, DOI: 10.1109/TII.2013.2287807.
H. Behjati, L. Niu, A. Davoudi, and P. L. Chapman, “Alternative time-invariant multi-frequency modeling of PWM Dc-Dc converters,” IEEE Trans. Circuits and Systems I-Regular Papers, vol. 60, pp. 3069-3079, Nov. 2013.
H. Behjati and A. Davoudi, “A single-stage multi-port dc-dc converter topology,” IET Power Electronics, vol. 6, pp. 392-403, Feb. 2013.
H. Behjati and A. Davoudi, “Power budgeting between diversified energy sources and loads using a multiple-input multiple-output dc-dc converter,” IEEE Trans. Industry Applications, vol. 49, pp. 1-12, Nov./Dec. 2013.
H. Behjati and A. Davoudi, “Reliability analysis framework for structural redundancy in power semiconductors,” IEEE Trans. Industrial Electronics, vol. 60, pp. 4376-4386, Oct. 2013.
H. Behjati and A. Davoudi, “Reference-change response assignment in PWM dc-dc converters,” IET Power Electronics, in press, Nov. 2013, (Manuscript ID: PEL-2013-0590.R1)
H. Saad, J. Peralta, S. Dennetiere, J. Mahseredjian, J. Jatskevich, J. A. Martinez, A. Davoudi, et all, “Dynamic averaged and simplified models for MMC-based HVDC transmission systems,” IEEE Trans. Power Delivery, vol. 28, pp. 1723-1730, July 2013.
S. Moayedi, F. Cingoz, and A. Davoudi, “Accelerated simulation of high-fidelity models of supercapacitors using waveform relaxation techniques,” IEEE Trans. Power Electronics, vol. 28, pp. 1-7, Nov. 2013.
V. Nasirian, A. Dvaoudi, S. Kaboli, and C. Edrington, “Excitation shifting, a general low-cost solution for eliminating ultra-low frequency pulsation in switched reluctance machines,” IEEE Trans. Magnetics, vol. 49, pp. 5135-5149, Sep. 2013.
V. Nasirian, S. Kaboli, A. Davoudi, and S. Moayedi, “High-fidelity magnetic characterization and analytical model development for switched reluctance machines”, IEEE Trans. Magnetics, vol. 49, pp. 1505-1515, April 2013.
V. Nasirian, S. Kaboli, and A. Davoudi, “Output power maximization and optimal symmetric freewheeling excitation for switched reluctance generators”, IEEE Trans. Industry Applications, vol. 49, pp. 1-12, May/June 2013.
V. Nasirian, Y. Karimi, A. Davoudi, M. R. Zolghadri, M. Ahmadian, and S. Moayedi, “Dynamic model development and variable switching frequency control for DCVM Cuk converters in PFC applications,” IEEE Trans. Industry Applications, vol. 49, pp. 1-15, Nov./Dec. 2013.
H. Behjati and A. Davoudi, “A multiple-input multiple-output dc-dc converter,” IEEE Trans. Industry Applications, vol. 49, pp. 1464-1479, May/June 2013.
S. Chawla, M. Naraghi, and A. Davoudi, “Effect of twist and porosity on the electrical conductivity of carbon nanofiber yarns,”Nanotechnology, Accepted, May 2013, (DOI:10.1088/0957-4484/24/25/ 255708).
S. Chiniforoosh, H. Atighechi, A. Davoudi, et al, “Steady-state and dynamic performance of front-end diode rectifier loads as predicted by dynamic average-value models,” IEEE Trans. Power Delivery, vol. 28, pp. 1533-1541, July 2013.
X. Wang, P. Zhang, Z. Wang, V. Dinavahi, G. Chang, J. Martinez, A. Davoudi, et all, “Interfacing issues in multi-agent simulation for smart grid applications,” IEEE Trans. Power Delivery, vol. 28, pp. 1918-1927, July 2013.
Anthology Work/Essays
L. Zhang, H. Gao, F.L. Lewis, and O. Kaynak, Special Section on “Networked Control Systems,” IEEE Transactions on Industrial Informatics, vol. 9, no.1, Feb. 2013.
Awards and Honors
Distinguished lecturer
Appointed as IEEE Control Systems Society "Distinguished Lecturer", 2012-2015.
Texas Regents' Outstanding Teaching Award
Texas Regents Outstanding Teaching Award
Texas Regents' Outstanding Teaching Award
Texas Regents Outstanding Teaching Award
Books
Lewis, F. L., & Liu, D. (2013). Reinforcement learning and approximate dynamic programming for feedback control. Hoboken, New Jersey: John Wiley and Sons, Inc.
Lewis, F. L., Zhang, H., Hengster-Movric, K., & Das, A. (2014). Cooperative control of multi-agent systems: Optimal and adaptive design approaches. Dordrecht: Springer.
Conference Papers
A. Bidram, A. Davoudi, and F. Lewis, “Two-layer distributed cooperative control of multi-inverter microgrids,” Proc. IEEE Applied Power Electronics Conf. and Exposition, Sept 2013, (Paper ID: 1493).
A. Bidram,F. L. Lewis, A. Davoudi, and S. S. Ge, “Adaptive and distributed control of nonlinear and heterogeneous multi-agent systems,” Proc. IEEE Conf. Decision & Control, pp. 6238-6243, Florence, Dec. 2013.
B. Kiumarsi-Khomartash, F.L. Lewis, M.-B. Naghibi-Sistani and A. Karimpour, “Optimal tracking control for linear discrete-time systems using reinforcement learning,” pp. 3845-3850, Proc. IEEE Conf. Decision & Control, Florence, Dec. 2013.
H. Behjati, A. Davoudi, and F. Lewis, “Cooperative current sharing in parallel dc-dc converters: distributed control,” IEEE Applied Power Electronics Conf. and Exposition, Sept 2013, (Paper ID: 1269).
M. Abouheaf and F.L. Lewis, “Approximate Dynamic Programming Solutions of Multi-Agent Graphical Games Using Actor-Critic Network Structures,” Proc. Int. Joint Conf. Neural Networks, Dallas, Aug. 2013.
M. Abouheaf, F.L. Lewis, S. Haesaert, R. Babuska, K. Vamvoudakis, “Multi-Agent Discrete-Time Graphical Games: Interactive Nash Equilibrium and Value Iteration Solution,” Proc. ACC, Washington DC, June 2013.
M. Aurangzeb, D. Mikulski, G, Hudas, F.L. Lewis, and Edward Gu, “Stable Structures of Coalitions in Competitive and Altruistic Military Teams,” Proc. SPIE Defense Symposium, Boston, April 2013.
M. Aurangzeb, F.L., Lewis, and M. Huber, “Efficient, Swarm-Based Path Finding in Unknown Graphs Using Reinforcement Learning,” Proc. Int. Conf. Control & Automation, pp. 870-877, Hangzhou, China, June 2013.
M.I. Abouheaf and F.L. Lewis, “Multi-agent differential graphical games: Nash online adaptive learning solutions,” Proc. IEEE Conf. Decision & Control, Florence, pp. 5803-5809, Dec. 2013.
M.N. Mahyuddin, G. Herrmann, and F.L. Lewis, “Distributed adaptive leader-following control for multi-agent multi-degree manipulators with finite-time guarantees,” Proc. IEEE Conf. Decision & Control, pp. 1496-1501, Florence, Dec. 2013.
R. Modares and F.L. Lewis, “Online solution to the linear quadratic tracking problem of continuous-time systems using reinforcement learning,” pp. 3851-3856, Proc. IEEE Conf. Decision & Control, Florence, Dec. 2013.
S. El Ferik, B. Sidiqui, and F.L. Lewis, “Distributed Nonlinear MPC Formation Control with Limited Bandwidth,” Proc. ACC, Washington DC, June 2013.
S. Moayedi and A. Davoudi, “Distributed cooperative load sharing in parallel dc-dc converters,” Digest accepted in IEEE Applied Power Electronics Conf. and Exposition, Sept 2013, (Paper ID: 1454).
Z. Li, Z. Duan, and F.L. Lewis,” Distributed Robust Consensus of Heterogeneous Uncertain Multi-agent Systems,” Proc. Chinese Control Conf, Xi’an China, July 2013.
Journal Articles
A. Bidram, A. Davoudi, F. Lewis, and J. Guerrero, “Distributed cooperative secondary control of microgrids using feedback linearization,” IEEE Trans. Power Systems, vol. 28, pp. 3462-3470, Aug. 2013.
A. Bidram, A. Davoudi, F. Lewis, and Z. Qu, “Secondary control of microgrids based on distributed cooperative control of multi-agent systems,” IET Generation, Transmission and Distribution, vol. 7, pp. 822-831, Aug. 2013.
C.K. Pang, C.V. Le, O.P. Gan, X.M. Chee, M. Luo, C.H. Leng, F.L. Lewis, “Classification of Energy Consumption Patterns for Energy Audit and Machine Scheduling in Industrial Manufacturing Systems,” Trans. Inst. Measurement & Control, vol. 35, no. 5, pp. 583-592, June 2013.
H. Modares, F.L. Lewis, and M.B. Naghibi Sistani, “Adaptive optimal control of unknown constrained-input systems using policy iteration and neural networks,” IEEE Trans. Neural Networks and Learning Systems, vol. 24, no. 10, pp. 1513-1525, Oct. 2013.
H. Modares, M.B. Naghibi Sistani, and F.L. Lewis, “A policy iteration approach to online optimal control of continuous- time constrained-input systems,” ISA Transactions, vol. 52, no. 5, pp. 611-621, 2013
K. Hengster-Movric and F.L. Lewis, “Cooperative Observers and Regulators for Discrete-time Multi-Agent Systems,” Int. J. Robust and Nonlinear Control, vol. 23, Issue 14, pp 1545–1562, 25 Sept. 2013.
K. Hengster-Movric, Keyou You, F.L. Lewis, and Lihua Xie, “Synchronization of Discrete-Time Multi-agent Systems on Graphs Using Riccati Design,” Automatica, vol. 49, no. 2, pp. 414-423, Feb. 2013.
S. Bhasin, R. Kamalapurkar, M. Johnson, K. Vamvoudakis, F.L. Lewis, and W.E. Dixon, “A novel actor-critic-identifier architecture for approximate optimal control of uncertain nonlinear systems,” Automatica, Vol. 49, No. 1, pp. 89-92, Jan. 2013
S. Liu, C. Du, J. Mou, L. Martua, J. Zhang, and F.L. Lewis, “Diagnosis of structural cracks using wavelet transform and neural networks,” J. Nondestructive Testing and Evaluation, vol. 54, pp. 9-18, 2013.
Other Creative Activities
Editorial Activity
Editor, Trans. Inst. Measurement and Control, Great Britain
Editorial Activity
Deputy Editor-in-Chief, J. Control Theory & Applications, South China Univ. Tech.
Editorial Activity
Editor, Taylor & Francis Book Series on Automation & Control Engineering
Presentations
Distinguished Lecture, Dept. of ECE, Univ. Central Florida, Oct. 2013.
Plenary Speech
H.S. Tsien International Distinguished Scientist Speaker, Chinese Academy of Sciences, Institute of Automation, Beijing, July 2013.
Plenary Speech
IEEE Distinguished Lecturer, IEEE Santa Clara Section, CA, Feb., 2013.
Plenary Speech
IEEE Distinguished Lecturer, Prague, Czech Republic, Dec. 2013.
Plenary Speech
Invited Lecture on Reinforcement Learning for Feedback Control, Chinese University of Hong Kong, 22 May 2013.
Plenary Speech
Opening Plenary Speaker, Int. Conf. Intelligent Control and Information Processing (ICICIP), Beijing China, June 2013.
Plenary Speech
Opening Plenary Speaker, “IEEE CIS Neural Network Pioneer Award Acceptance Speech,” Int. Joint Conf. on Neural Networks, IJCNN, Dallas, Texas, Aug. 2013.
Plenary Speech
Opening Speaker, Workshop on Cooperative Control, Chinese Academy of Sciences, Academy of Mathematics and Systems Science, Beijing, July 2013.
Plenary Speech
Plenary Speaker, IEEE CYBER, Nanjing, May 2013.
Plenary Speech
Plenary Speaker, IEEE Int. Conf. on Information & Automation, Yinchuan, China, Aug. 2013
Plenary Speech
Plenary Speaker, IFAC Int. Conf. on Intelligent Control and Automation Science, Chengdu, China Sept. 2013.
Plenary Speech
Visiting SIMTech Fellow 20th Anniversary Speaker, Singapore Institute of Manufacturing Technology, May 2013.
Plenary Speech
Journal Articles
Lei Xu, Qilian Liang, “Zero Correlation Zone Sequence Pair Sets for MIMO Radar,” accepted by IEEE Trans on Aerospace and Electronic Systems.
Xinsheng Xia, Qilian Liang, “Fuzzy Optimization for Mobile Ad Hoc Networks: a Bottom-up Cross-layer Approach,” accepted by International Journal of Computer Networks.
Zhen Zhong, Qilian Liang, Lingming Wang, “Biologically-inspired Energy Efficient Distributed Acoustic Sensor Networks,” accepted by Ad Hoc & Sensor Wireless Networks.
Awards and Honors
Inducted as Charter Fellow into National Academy of Inventors
Election to NAI Fellow status is a high professional distinction accorded to academic inventors who have demonstrated a highly prolific spirit of innovation in creating or facilitating outstanding inventions that have made a tangible impact on quality of life, economic development, and the welfare of society. Nominees must be a named inventor on at least one patent issued by the United States Patent and Trademark Office and must be affiliated with a university, nonprofit research institute or other academic entity. Academic inventors and innovators elected to the rank of NAI Charter Fellow are nominated by their peers for outstanding contributions to innovation in areas such as patents and licensing, innovative discovery and technology, significant impact on society, and support and enhancement of innovation.
Journal Articles
Daesuk Kim, Robert Magnusson, Moonseob Jin, Jaejong Lee, and Won Chegal, “Complex object wave direct extraction method in off-axis digital holography,” Optics Express, vol. 21, no. 3, pp. 3658–3668, February 11, 2013.
Jae Woong Yoon, Gang Min Koh, Seok Ho Song, and Robert Magnusson, “Measurement and modeling of a complete optical absorption and scattering by coherent surface plasmon-polariton excitation using a silver thin-film grating,” accepted in Physical Review Letters.
R. Magnusson, “Flat-top resonant reflectors with sharply delimited angular spectra: an application of the Rayleigh anomaly,” Optics Letters, vol. 38, no. 6, pp. 989–991, March 15, 2013.
Editorial Roles
Selected Editorial Board
Associate Editor for Multidimensional Systems and Signal Processing Journal, Springer
Editorial Roles
Memberships
Reviewer for the following journals:IEEE Transactions on Robotics, IEEE Transactions on Mechatornics, IEEE/ASME Journal of MEMS, Journal of Intelligent and Robotic Systems, IEEE Transactions on Automation Science and Engineering, IEEE Journal of Control S
Journal Articles
“A Batteryless, Implantable, Dual-sensor Capsule for Gastroesophageal Reflux Monitoring,” H. Cao, S. Rao, S.-J. Tang, H.F. Tibbals, S. Spechler and J.-C. Chiao, Gastrointestinal Endoscopy.
Conference Papers
A. Aduroja, I. D. Schizas and V. Maroulas, ``Distributed Principal Component Analysis in Sensor Networks,'' Proc. of IEEE Intl. Conf. on Acoustics, Speech and Signal Processing (ICASSP) , May 26-31, 2013.
I. D. Schizas, `` Adaptive Distributed Sparsity-Aware Matrix Decomposition,'' Proc. of IEEE Intl. Conf. on Acoustics, Speech and Signal Processing (ICASSP) , May 26-31, 2013.
J. Chen and I. D. Schizas, ``Distributed Sparse Canonical Correlation Analysis in Clustering Sensor Data,'' Proc. of the Asilomar Conf. on Signals, Systems and Computers, Pacific Grove, CA, Nov. 2013
Journal Articles
I. D. Schizas, `` Distributed Informative-Sensor Identification using Sparsity-Aware Matrix Factorization,'' IEEE Trans. on Sig. Proc., vol. 61, no. 18, pp. 4610--4624, Sep. 2013.
Presentations
Distributed Determination of Informative Network Nodes via Sparsity-Cognizant Covariance Decomposition
Distributed Informative-Sensor Identification and Tracking via Sparsity-Aware Covariance Factorization
IEEE Antennas and Propagation Society Technical Seminar, Fort Worth Chapter, Nov. 2013.
Distributed Informative-Sensor Identification via Sparsity-Aware Covariance Decomposition
Journal Articles
Qiushu Chen, Xingwang Zhang, Yuze Sun, Michael Ritt, Sivaraj Sivaramakrishnan, and Xudong Fan, "Highly sensitive fluorescent protein FRET detection using optofluidic lasers," Lab on a Chip 13, 2679–2681 (2013).
Xiang Wu, Qiushu Chen, Yuze Sun, and Xudong Fan, “Bio-inspired optofluidic lasers with luciferin,” Applied Physics Letters 102, 203706 (2013).
Conference Papers
A.F. Matasso, D.A. Wetz, and F. Liu, ‘The Effects Of Internal Pressure Evolution On The Ageing Of Commercial Li-Ion Cells,’ Abstract submitted to the 224th Electrochemical Society, San Francisco, California, October 27 – November 1, 2013.
B. Shrestha, D.A. Wetz, and P.M. Novak, ‘The Impact of High Pulsed Loading on the Fatigue of Electrochemical Energy Storage Devices,’ Electrochemical Society Transactions, Vol. 50, No. 26, March 2013.
B. Shrestha, P. Novak, and D.A. Wetz, ‘Evaluation of High C Rate Cycle Induced Aging on Low Impedance Lithium-Ion Batteries using In-Situ Electrochemical Impedance Spectroscopy (EIS),’ Abstract submitted to the 224th Electrochemical Society, San Francisco, California, October 27 – November 1, 2013.
B.M. Huhman, D.A. Wetz, B. Shrestha, and P.M. Novak, ‘Characterization of High Power Battery Cells and Analysis of Battery Module Cooling for Shipboard Pulsed Load Management,’ Proceedings of the 2013 American Society of Naval Engineers (ASNE) Day, February 21-22, 2013, Arlington, VA.
B.M. Huhman, J.M. Neri, and D.A. Wetz, ‘Design of a Battery Intermediate Storage System for Rep-Rated Pulsed Power Loads,’ Proceedings of the 2013 IEEE Electric Ship Technologies Symposium, April 22 – 24, 2013, Arlington, Virginia.
D. T. Motes, A. E. Zielinski, D. Wetz, D. Surls, T. M. Least, J. A. Reed, and M. Mazurek, ‘Experimental Results from a Small Caliber Hybrid Electrothermal Launcher,’ Proceedings of the 60th JANNAF Propulsion Meeting / 9th Modeling and Simulation (MSS) / 7th Liquid Propulsion (LPS) / 6th Spacecraft Propulsion (SPS) / Joint Subcommittee Meeting, Colorado Springs, Colorado, April 29 - May 2, 2013.
J.P. Kelley, D.A. Wetz, J.A. Reed, I.J. Cohen, G. K. Turner, and W.-J. Lee, ‘The Impact of Power Quality when High Power Pulsed DC and Continuous AC Loads are Simultaneously Operated on a MicroGrid Testbed,’ Proceedings of the 2013 IEEE Electric Ship Technologies Symposium, April 22 – 24, 2012, Arlington, Virginia.
P.M. Novak, D.A. Wetz, and B. Shrestha, ‘Cycling Fatigue induced on Electrochemical Energy Storage Cells as a result of High C Pulsed Charging,’ Electrochemical Society Transactions, Vol. 50, No. 26, March 2013.
Z. Ding, M. Liu, W.-J. Lee, and D.A. Wetz, ‘Autonomous Operation MicroGrid for Rural Electrification,’ Proceedings of the 2013 IEEE Power and Energy Society General Meeting, July 21 – 25, 2013, Vancouver, British Columbia, Canada
Editorial Roles
Guest Editor
October 2014 Special Issue of the Transactions on Plasma Science (TPS) on Pulsed Power Systems
Guest editor of the August 2013 issue of the IEEE Transactions on Dielectrics and Electrical Insulation (TDEI)
Served as one of two guest editors
Journal Articles
D.A. Wetz, B. Shrestha, and P. Novak, ‘Elevated Rate Cycling of High Power Electrochemical Energy Storage Devices for Use as the Prime Power Source of an EM Launcher,’ IEEE Transactions on Plasma Science, Vol. 41, Issue 5, pp. 1319 – 1325, May 2013.
D.A. Wetz, B. Shrestha, and P. Novak, ‘High Power Electrochemical Energy Storage for Directed Energy Applications,’ SAE Int. J. Passeng. Cars – Electron. Electr. Syst. / Volume 6, Issue 1, May 2013.
D.A. Wetz, B. Shrestha, and P.M. Novak, ‘Pulsed Evaluation of High Power Electrochemical Energy Storage Devices,’ Accepted for Publication in the IEEE Transactions on Dielectrics and Electrical Insulation, August 2013.
D.A. Wetz, B. Shrestha, P. Novak, and Y. Chen, ‘Characterization of High Power Electrochemical Energy Storage Devices for use in Naval Applications,’ Accepted for publication in the September 2013 issue of the ASNE Journal, Publication Pending.
A. Jain, D.A. Wetz, S.J. Drake, J.K. Ostanek, S.P. Miller, J.M. Heinzel, ‘Measurement of Anisotropic Thermophysical Properties of Cylindrical Li-ion Cells,’ Paper in progress.
B.M. Huhman, J.M. Neri, and D.A. Wetz, ‘Application of a Compact Electrochemical Energy Storage to Pulsed Power Systems,’ Accepted for publication in the IEEE Transactions on Dielectrics and Electrical Insulation Special Issue in October 2013.
Poster Abstracts
B. Shrestha, P.M. Novak, and D.A. Wetz, Evaluation of High Power Energy Storage Devices for Use in Compact Pulsed Power Systems,’ Abstract only, Proceedings of the 2013 IEEE Pulsed Power Conference Proceedings, San Francisco, California, June 16 – 21, 2013.
B.M. Huhman, J.M. Neri, and D.A. Wetz, ‘Investigations into the Use of an LLC Converter for Rep-Rate Capacitor Charging Systems,’ Proceedings of the 2013 IEEE Pulsed Power Conference Proceedings, San Francisco, California, June 16 – 21, 2013.
J.P. Kelley, D.A. Wetz, G.K. Turner, and I. Cohen, ‘Integration of Pulsed Loads into a MicroGrid Architecture,’ Proceedings of the 2013 IEEE Pulsed Power Conference Proceedings, San Francisco, California, June 16 – 21, 2013.
Conference Papers
W. D. Zhou, Z. Ma, and H. Yang “Transfer printed photonic crystal nanomembrane lasers for integrated silicon photonics (Invited)”, Photonics West 2013, Feb. 2-7, 2013, San Francisco, CA.
W. D. Zhou, Z. Ma, and H. Yang “Transfer Printed Semiconductor Nanomembrane Photonics (Invited)”, 2013 TMS Annual Meeting & Exhibition, Mar. 3-7, 2013, San Antonio, TX.
Z. Ma and W.D. Zhou, “Transferrable semiconductor nanomembranes and their versatile applications (Invited)”, SPIE Micro- and Nanotechnology Sensors, Systems, and Applications Conference 2013, April 29 - May 3, 2013, Baltimore, MD.
Journal Articles
D. Zhao, H. Yang, S. Chuwongin, J.H. Seo, Z. Ma and W. Zhou, “Design of photonic crystal membrane reflector based VCSELs”, IEEE Photon. J. (accepted)
R. Li, S. Wang, S. Chuwongin, and W. Zhou, “Nanoscale Silver-assisted Wet Etching of Crystalline Silicon for Flexible Large Area Photovoltaics”, J. Nanosciece and Nanotech. (accepted)
College of Engineering
Dean Khosrow Behbehani
Department of Industrial, Manufacturing, and Systems Engineering
Chair Paul Componation
Conference Proceedings
Boardman, B. & Peterson, L. (2013). A Study of Team Underachievers in an Introduction to Engineering Course, 5th Annual FYEE Conference, Pittsburgh, PA
Boardman, B. (2013). An iPhone Application Developed for Time Study Practice, ASEE GSW Annual Conference, Arlington, TX
Conference Proceedings
Dickson, J. F., J. M. Rosenberger, V. C. P. Chen, P. King, and A. Robinson (2013). “Optimization to Select Energy Efficient Building Options.” In Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, Puerto Rico, May.
Kulvanitchaiyanunt, A., V. C. P. Chen, J. M. Rosenberger, W.-J. Lee, and P. Sarikprueck (2013). “Control for a System of PHEV Charging Stations.” In Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, Puerto Rico, May.
LeBoulluec, A. K., L. Zeng, V. C. P. Chen, J. M. Rosenberger, and R. J. Gatchel (2013). “Outcome and State Transition Modeling for Adaptive Interdisciplinary Pain Management.” In Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, Puerto Rico, May.
Zhang, Z., J. M. Rosenberger, V. C. P. Chen, L. Zeng, and D. Bergman (2013). “Adaptive Dynamic Programming for Airport Deicing.” In Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, Puerto Rico, May.
Journal Articles
Phaladiganon, P., S. B. Kim, V. C. P. Chen, J.-G. Baek, and T. Sukchotrat (2013). “Principal Component Analysis-Based Control Charts for Multivariate Nonnormal Distributions.” Expert Systems with Applications, 40, pp. 3044–3054. DOI 10.1016/j.eswa.2012.12.020
Afotey, B.,, M. L. Sattler, S. P. Mattingly, and V. C. P. Chen (2013). “Statistical Model for Estimating Carbon Dioxide Emissions from a Light-Duty Gasoline Vehicle.” Journal of Environmental Protection, special issue on Air Pollution, 4, pp. 8–15. DOI 10.4236/jep.2013.48A1002
Fan, H.-Y., P. K. Tarun, and V. C. P. Chen (2013). “Adaptive Value Function Approximation for Continuous-State Stochastic Dynamic Programming.” Computers and Operations Research, 40, pp. 1076–1084. DOI 10.1016/j.cor.2012.11.016
Kim, S. B., W. Jitpitaklert, V. C. P. Chen, and P. Phaladiganon (2013). “Data Mining Model Adjustment Control Charts for Cascade Processes.” European Journal of Industrial Engineering, 7(4), pp. 442–455. DOI 10.1504/EJIE.2013.055017
Lin, C.-F., A. K. LeBoulluec, L. Zeng, V. C. P. Chen, and R. J. Gatchel (2013). “An Adaptive Pain Management Framework.” Health Care Management Science, forthcoming. DOI 10.1007/s10729-013-9252-0
Pala-En, N., M. L. Sattler, B. H. Dennis, V. C. P. Chen, and R. L. Muncrief (2013). “Measurement of Emissions from a Passenger Truck Fueled with Biodiesel from Different Feedstocks.” Journal of Environmental Protection, special issue on Air Pollution, 4, pp. 74–82. DOI 10.4236/jep.2013.48A1010
Tarun, P. K., V. C. P. Chen, and H. W. Corley (2013). “Divergence of Pairwise Comparison Matrices Computed Using the Successive Geometric Mean (SGM) Method in a Multiple Stage, Multiple Objective Model.” Journal of Multi-Criteria Decision Analysis, forthcoming.
Conference Proceedings
Defining and Addressing the Risk of Undesirable Emergent Properties , S. Ferreira, M. Faezipour, and H.W. Corley, 2013 IEEE International Systems Conference (SysCon), Orlando, FL, 173-178, April, 2013.
Journal Articles
Constraint Optimal Selection Techniques (COSTs) for Linear Programming, Goh Saito, H.W. Corley, and Jay Rosenberger, American Journal of Operations Research, Vol. 3, 2013, 53-64.
Constraint Optimal Selection Techniques (COSTs) for Nonnegative Linear Programming Problems, Saito, G., H. W. Corley, J. M. Rosenberger, and T.-K. Sung, Optimization Methods and Software, in revision.
Divergence Behavior of the Successive Geometric Mean (SGM) Method of Pairwise Comparison Matrix Generation for a Multiple Stage, Multiple Objective Optimization Problem, P.K. Tarun, V. C. P. Chen, H. W. Corley,Journal of Multi-Criteria Decision Analysis, in review.
Conference Papers
Faezipour, M., Ferreira, S., 2013, A System Dynamics Perspective of Patient Satisfaction in Healthcare, 2013 Conference on Systems Engineering Research, Procedia Computer Science, Volume 16, pp. 148-156.
Faezipour, M., Ferreira, S., 2013, Developing a Systems Thinking Perspective of Hospital Water Sustainability, 2013 IEEE International Systems Conference (SysCon), pp. 109-113.
Ferreira, S. Faezipour, M., Corley, H.W., 2013, Defining and Addressing the Risk of Undesirable Emergent Properties, 2013 IEEE International Systems Conference (SysCon), pp. 836-840.
Smartt, C., Ferreira, S., 2013, Applying Systems Engineering to Survey Research, Procedia Computer Science, 2013 Conference on Systems Engineering Research, Volume 16, pp. 1102–1111.
Book Chapters
Jones, E.C., and Gnaneswaran, V. “RFID has arrived and is ready for the Future.” Intech-Open Access Publisher. 25% contribution
Books
Jones, E.C. “Modern Quality for Organizations Using Lean Six Sigma Techniques,” CRC Press: Taylor and Francis Group, Boca Raton, FL, Expected publication date summer 2013. 100% contribution.
Conference Papers
Jones, E.C. “The Engineering Economics of Six Sigma Cost Justification” American Society for Engineering Education Conference 2013, June 23-25, 2013, Atlanta, GA.
Gnaneswaran, V. andJones, E. C. “Time Study and Work Measurement: Impacts on Six Sigma Projects” Industrial and Systems Engineering Research Conference (ISERC) 2013,May 18-22, 2013, San Juan, Puerto Rico.
Gnaneswaran, V., and Jones, E.C., “Investigation of RFID based Automated Monitoring System on Medical Errors.” Healthcare Systems Process Improvement Conference 2013, March 1-4, 2013, New Orleans, Louisiana.
Editorial Roles
International Journal of Radio Frequency Identification Technology and Applications
Associate Editor
International Journal of Supply Chain Management
Editorial Board Member
Journal Articles
Gnaneswaran, V., Jones, E.C., and Bishu, R.R. “Development of Force-Endurance Models for Simulated Dental Task.” International Journal of Industrial Ergonomics, 43, 2013, pp.31 – 39.
Gray, B., Jones, E. C., Mulflur, W., and Alvarez, C. “The Impact on Inventory with the Implementation of RFID into SCOR based ERP Modules,” International Journal of Supply Chain Management. 2(2), 2013.
Jones, E.C. and Perkins, J. “Investigating Radio Frequency Identification (RFID) for Linear Asset Management,” Public Works Management & Policy. 2013.
Jones, E.C., Gnaneswaran, V., Mulflur, W., and Armstrong, H. “Economic Order Quantity Modeling using Automatic Identification Technologies,” International Journal of Supply Chain Management. 2(3), 2013.
Presentations
How to Develop and Write a Research Paper'
How to perform Graduate Research'
Insights to Performing Research Studies'
Preparing for Graduate Education'
The impact Security Advances via Nano Tecnology (SAVANT) on STEM education'
Warehousing Principles'
Patents
Methods and Systems for Improved Biodiesel Production. Patent No. 12/556,857
Methods and Systems for Improved Biodiesel Production
Methods and Systems for Improved Biodiesel Production. Patent No. 8,404,005
Methods and Systems for Improved Biodiesel Production
Conference Proceedings
Graham, Andrea and Jamie Rogers. "Scenario Analysis Evaluating the Sustainability Impacts of Freight Transportation Networks." Proceedings of Industrial & Systems Engineering Research Conference – San Juan, PR May, 2013.
Graham, Andrea, Jamie Rogers and Meanie Sattler. "Assessing Life Cycle Sustainability in Engineering Economics." Proceedings of Industrial & Systems Engineering Research Conference – San Juan, PR May, 2013.
Kang, Sung-Lien, Gary Chen, and Jamie Rogers. "Wireless LAN Access Point Location Planning." Proceedings of the Institute of Industrial Engineers 2013 Asian Conference - Taipei, Taiwan, July 2013.
Journal Articles
Fan H., P. K. Tarun, D. T. Shih, S. B. Kim, V. C. P. Chen, J. M. Rosenberger, D. Bergman.“Data Mining Modeling on the Environmental Impact of Airport Deicing Activities” Expert Systemswith Applications.
Pilla V., J. M. Rosenberger, V. Chen, N. Engsuwan, S. Siddappa. “A Multivariate AdaptiveRegression Splines Cutting Plane Approach For Solving A Two-Stage Stochastic Programming FleetAssignment Model” European Journal of Operational Research.
Presentations
Enhancing Clinical Utility of Respiratory-gated PET/CT Imaging using Patient Classification
A respiratory-gated (RG) method allows patients with lung tumors to breathe normally in PET/CT scan while minimizing respiratory motion effects. However, not all patients can benefit from the RG method. We constructed a prediction model to predict the effectiveness of the RG method on each individual patient only using features extracted from respiratory motion traces. The technique can be used to classify patient groups and assign the most appropriate strategy for each patient in PET/CT scan.
Awards and Honors
Richard S. and Harriet K. Fein Scholarship
Conference Proceedings
LeBoulluec, A., Zeng, L., Chen, V., Rosenberger, J., and Gatchel, R. (2013) Outcome and State Transition Modeling for Adaptive Interdisciplinary Pain Management. proceeding of the Industrial and Systems Engineering Research Conference (ISERC), May 18-22, 2013, Puerto Rico.
Zhang, Z., Rosenberger, J., Chen, V., Zeng, L., and Bergman, D. (2013) Adaptive Dynamic Programming for Airport Deicing. proceeding of the Industrial and Systems Engineering Research Conference (ISERC), May 18-22, 2013, Puerto Rico.
Journal Articles
Knopp, J., and Zeng, L. (2013) Statistical Analysis of Hit/Miss Data. Materials Evaluation, 71(3):323-329.
Lin, C.-F., LeBoulluec, A. K., Zeng, L., Chen, V., and Gatchel, R. J. (2013) A Decision-Making Framework for Adaptive Pain Management. Health Care Management Science, in press.
Presentations
Demand Forecasting in Service Industries
Robust Phase I Analysis of Profile Data with Application in Low-E Glass Manufacturing Processes
College of Engineering
Dean Khosrow Behbehani
Department of Materials Science and Engineering
Chair Efstathios "Stathis" I. Meletis
Journal Articles
Interface Engineered Ferroelectric BaTiO3//SrTiO3 Heterostructures (I) with Anomalous Clamped Polarization on Si (001), Liu, G. Collin, Silva, C.R. Ma, Liu, C.L. Chen, J. He, J.C. Jiang, E.I. Meletis, Qu, Zhang, A. Bhalla, Integrated Ferroelectrics, (in press)
Nanodomain and Interface Structure in Epitaxial BaTiO3 Thin Films on MgO Deposited by Magnetron Sputtering, J. He, H.Q. Jiang, J.C. Jiang and E. I. Meletis, Journal of Materials Science (in press).
Conference Proceedings
H. Xu, C.-U. Kim, and T. K. Lee, "Isothermal Shear Fatigue Mechanism of Lead Free Solder Joints", 60th ECTC, pp1299-1303
Journal Articles
E. Zin, W. H. Bang, E. T. Ryan, S. King, and C. -U. Kim, "Study of Viscoplastic Deformation in Porous Organosilicate Thin Films for Ultra Low-k Applications", Appl. Phys. Lett. 102, 221909 (2013)
Awards and Honors
NSF CAREER Award
Journal Articles
Hsu, Chiajen, Chienwen Huang, Yaowu Hao and Fuqiang Liu. Au/Pd Core-Shell Nanoparticles with Varied Hollow Au Cores for Enhanced Formic Acid Oxidation. Nanoscale Research Letters 8, (2013): 113.
Hsu, Chiajen, Chienwen Huang, Yaowu Hao and Fuqiang Liu. Electro-Oxidation of Formate-Based Solutions on Au/Pd Core–Shell Nanoparticles – Experiment and simulation. International Journal of Hydrogen Energy 38 (35), (2013): 15532-15541.
Hsu, Chiajen, Chienwen Huang, Yaowu Hao and Fuqiang Liu. Impact of Surface Roughness of Au Core in Au/Pd Core–Shell Nanoparticles toward Formic Acid Oxidation – Experiment and Simulation. Journal of Power Sources 243, (2013): 343-349.
Zhang, G., Z. Shao, W. Lu, H. Xiao, F. Xie, X. Qin, J. Li, Fuqiang Liu and Baolian Yi. Aqueous-Phase Synthesis of Sub 10 Nm Pdcore@Ptshell Nanocatalysts for Oxygen Reduction Reaction Using Amphiphilic Triblock Copolymers as the Reductant and Capping Agent. The Journal of Physical Chemistry C 117, no. 26 (2013): 13413-13423.
Editorial Roles
Associate Editor:
Advanced Science Letters, Lubricants, International Journal of Corrosion
Editor-in-Chief
Journal of Nano Research (JNanoR), www.scintific.net
Editor-in-Chief
Quantum Matter, www.aspbs.com/qm
Editor-in-Chief
Journal of Surfaces and Interfaces of Materials,
Journal Articles
J. He, J.C. Jiang, J. Liu, M. Liu, G. Collins, C.R. Ma, C.L. Chen, E.I. Meletis, Spontaneous Nano-Cube Structures in Structural Gradient Epitaxial La0.5Ba0.5CoO3 Films, Journal of Materials Science.
J. He, J.C. Jiang, M. Liu, G. Collins, C.R. Ma, C.L. Chen, A. Bhalla and E.I. Meletis, Microstructure and Nano-mechanical Properties of Epitaxial BaTiO3-based Multilayered Thin Films on MgO Substrate, Journal of Surfaces and Interfaces of Materials (accepted).
J. He, J.C. Jiang, M. Liu, J. Liu, G. Collins, C.R. Ma, C.L. Chen, A. Bhalla, E.I. Meletis, Growth Transition from an Epitaxial Structure to Twin-coupled Nano-pillars in Mn-doped Ba(Zr,Ti)O3 Thin Films, Philosophical Magazine Letters.
Jie He, Jiechao Jiang, Jaroslav Vlcek, Petr Zeman, Petr Steidl, and Efstathios I. Meletis, Microstructure Characterization of High-temperature, Oxidation Resistant Si-B-C-N Films, Thin Solid Films, 2013 (in print).
M. Liu, J. Liu, G. Collins, C.R. Ma, C. L. Chen, G. Subramanyam, J. He, J.C. Jiang, E.I. Meletis, C. Dai, Y. Lin, and Q.Y. Zhang, Epitaxial Nature and Microwave Dielectric Properties of Mn-doped Ba(Zr,Ti)O3 Thin Films by Pulsed Laser Deposition, Crystal Growth and Design.
M. Liu, J. Liu, G. Collins, C.R. Ma, C.L. Chen, G. Subramanyam, J. He, J.C. Jiang, E.I. Meletis, C. Dai, Y. Lin, and Q.Y. Zhang, Epitaxial Nature and Microwave Dielectric Properties of Mn-doped Ba(Zr,Ti)O3 Thin Films by Pulsed Laser Deposition, Crystal Growth and Design, (accepted).
Ming Liu, Jian Liu, Chunrui Ma, Gregory Collins, Chonglin Chen, Andy D. Alemayehu, Guru Subramanyam, Jie He, Jiechao Jiang, Efstathios I. Meletis and Amar Bhalla, Enhanced Dielectric Properties of (Ba,Sr)TiO3//Ba(Zr,Ti)O3 Heterostructures with Optimized Structure Design, The Royial Society of Chemistry CrystEngComm 10.1039/C3CE27106D (May 13, 2013).
Y. Wang, E.I. Meletis and H. Huang, Quantitative study of surface roughness evolution during low-cycle fatigue of 316L stainless steel using Scanning Whitelight Interferometric Microscopy, International Journal of Fatigue 48, 280-288 (2013).
Journal Articles
H. K. Islam, S. Priya, and H. Stephanou. "Piezoelectric Transformer based Magnetic Field Sensor," Appl. Phys. Lett, vol. 89,.
J. J. Sharma, A. K. Hossu, and S. Priya. "Self-Assembled Periodic Nanoporous Network in Multifunctional ZrO2 – CeO2 – (La1-xSrx)MnO3 Composites," Appl. Phys. Lett,.
M. V. Bergs, S. P. Islam, and H. Stephanou. "Magnetic field Anomaly Detector Using Magnetoelectric Composites," J. Appl. Phys,.
Priya, S. Advances in Energy Harvesting Using Low Profile Piezoelectric Transducers. J. Electrceram.
Books
Schommers, W. (2014). Nanodesign: Some basic questions. New Jersey: World Scientific Publishing Co. Pte. Ltd.
Books
Harry F. Tibbals, Medical Nanotechnology and Nanomedicine, Chinese Edition (with new Preamble), Xi'an Jiaotong University Press, Beijing, China (June, 2013)
Conference Papers
Shant Aghyarian, Connie Mantz, Benjamin Lund, Philippe Zimmern, Harry Tibbals, Robert Eberhart, Walter Voit, Dennis Smith Jr, Biomechanical testing of human vaginal prolapse for improved modeling, Neurourology and Urodynamics, Volume 32, 136-136 (Wiley-Blackwell), 2/1/2013
Journal Articles
Gastrointestinal Endoscopy April 2013(Vol. 77, Issue 4,Pages 649-653); Batteryless implantable dual-sensor capsule for esophageal reflux monitoring H. Cao, S. Rao, S.-J. Tang MD, H. F. Tibbals, S. Spechler MD, J.-C. Chiao, Gastrointestinal Endoscopy, published online 04 January 2013, http://www.giejournal.org/article/S0016-5107%2812%2902865-9/abstract; PMID: 23290721
Harry F. Tibbals, "New Directions in Nanoparticle Drug Delivery: Editorial Review", J. Nano Research, 2013
Patents
Integrated patient bed system. Patent No. 8606344
The present invention includes an integrated system and methods for patient treatment, the system includes a hospital bed; a plurality of patient diagnostic and treatment devices connected to a network, wherein each of the devices can communicate to a network and exchange information with the network about the care of a patient; and a processor accessible adjacent to the bed and connected to the network to integrate information obtained from the devices through the network with one or more additional sources of information databases, wherein the processor can communicate to one or more patient treatment devices either directly or via the network and the processor directs the one or more patient treatment devices to change the treatment of the patient.
Journal Articles
Kyungsuk Yum, Thomas McNicholas, Bin Mu and Michael S. Strano, “Single-Walled Carbon Nanotube-Based Near-Infrared Optical Glucose Sensors toward In Vivo Continuous Glucose Monitoring,” Journal of Diabetes Science and Technology 7, 93 (2013).
Jingqing Zhang, Markita P. Landry, Paul W. Barone, Jong-Ho Kim, Shangchao Lin, Zachary W. Ulissi, Dahua Lin, Bin Mu, Ardemis A. Boghossian, Andrew J. Hilmer, Alina Rwei, Allison C. Hinckley, Sebastian Kruss, Mia A. Shandell, Nitish Nair, Steven Blake, Fatih Sen, Selda Sen, Robert G. Croy, Deyu Li, Kyungsuk Yum, Jin-Ho Ahn, Hong Jin, Daniel A. Heller, John M. Essigmann, Daniel Blankschtein, Michael S Strano, “Molecular Recognition Using Corona Phase Complexes Made of Synthetic Polymers Adsorbed on Carbon Nanotubes,” Nature Nanotechnology 8, 959 (2013).
College of Engineering
Dean Khosrow Behbehani
Department of Mechanical and Aerospace Engineering
Chair Erian Armanios
Book Chapters
Ashfaq Adnan, Farzad Sarker, Sheikh Ferdous, Book Chapter; Tittle: Biomechanics of Mineralized Collagen" in "multiscale Biomechanics of Multiscale Simulations and mechanics of Biological Materials".
Journal Articles
A.R. Nazmus Sakib, Narendra De, Ashfaq Adnan, “Effect of nanoscale confinement on the Mode II fracture of confined nanosolids”, Computational Materials Science, 2013, 68, pp 271-279.
Mujibur R. Khan, Hassan Mahfuz, Ashfaq Adnan and Ishraq Shabib, “Elastic properties of UHMWPE-SWCNT nanocomposites fiber: An experimental, theoretical and molecular dynamics evaluation” Accepted for Publications in Journal of Materials Engineering and Performance.
Sheikh Fahad Ferdous, Farzad Sarker, Ashfaq Adnan,Role of Nanoparticle Dispersion and Filler-Matrix Interface on the Matrix Dominated Failure of Rigid C60-PE Nanocomposites: A molecular dynamics simulation study. POLYMER
Journal Articles
A. Free, D. Kehmeier, and D. Agonafer. "Driving PCA thermal analysis using IDF 4.0 data exchange," American Society of Mechanical Engineers, EEP, vol. 26, no. 2, pp. 2191-2197,.
Presentations
A Concurrent Engineering Based CFD Modeling Methodology For Computer Packaging Applications
Invited Lecture, Penn State University, College Park
An Integrated Design Approach for Cooling of Electronic Packaging
Invited Lecture, Carnegie Mellon University, Pittsburgh, PA
An Integrated Thermo/Mechanical Modeling Approach
University of Rhode Island, Graduate Student Seminar
Application of Computational Fluid Mechanics to Electronic Cooling
City College of New York, Graduate Student Seminar
Application of Computational Techniques to Electronic Packaging
Cornell University
Application of Computational Techniques to Electronic Packaging
Rutgers University
Application of Computational Techniques to Electronic Packaging
Invited Lecture, University of Texas, Arlington
Application of Finite Element Modeling to Cooling of Electronic Packaging
Invited Lecture, Penn State University, Harrisburg
Applications of PHOENICS to Electronic Cooling
Stevens Institute of Technology
Computational Fluid Mechanics Applications for High End Systems
Alabama A&M University
Computational Fluid Mechanics Applications for High End Systems
Applied Mathematics Department, SUNY, New Paltz, NY.
Computer Aided Thermal Engineering
Presented at a Graduate Student Seminar, Georgia Tech, Atlanta, Ga.
Computer Aided Thermal Engineering
Invited Lecture, University of Colorado, Boulder, Colorado
Electronic Packaging
Invited Guest Lecture to UTA College of Engineering Mid-Cities Technical Club
Mathematical Modeling in an Industrial Setting
Mathematical Modeling of Materials Processing Operations, Winter Symposium, Massachusetts Institute of Technology
Numerical Modeling of the Internal and External Resistance of a TCM
Seminar Presentation, West Point, NY.
The Role of Engineers in an Industrial Setting
Howard University, Washington, D.C.
The Use of Computational Algorithms In The Design Of Electronic Thermal Control Systems
Short Course, University of Nevada, Reno
“Packaging of MEMS”
Invited Presentation to Denso International Ltd
Conference Papers
S. Malla, M. Amaya, H. Moon, S.M. You, Liquid Cooling Of A Hot Spot Using A Superhydrophilic Nanoporous Enhanced Surface, Proceedings of 2013 ASME International Mechanical Engineering Congress & Exposition, November 15-21, San Diego, California, (2013)
Conference Papers
Armanios, E. A., Kamat, M. P., and Lentz, W. K., “Optimum Coupling in Composite Thin-Walled Closed Section Beams,” COMPOSITES '95: Recent Advances in Japan and the United States, I. Kimpara, H. Miyairi & N. Takeda, Ed., Proc. Japan -U.S. CCM-VII, pp. 683-691.
Editorial Roles
Editorship
Editorial Review Committee Member, Journal of the National Technical Association.
Editorship:
Editorial Board Member, Trans Tech Publications Ltd., Key Engineering Materials series.
Awards and Honors
ASME Conference Paper Accepted with Honors
Paper entitled "Multiscale Dynamic Modeling of Flexibility in Myosin V" by Mahdi Haghshenas Jaryani and Alan Bowling, accepted with honors to the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE)
Best Presentation Award
Conference Proceedings
Adrian Rodriguez and Alan Bowling, "Study of the stick-slip transition of Newton’s cradle with friction," In Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE), August 4-7, 2013. Portland, Oregon, USA.
Mahdi Haghshenas-Jaryani and Alan Bowling, "Multiscale dynamic modeling of flexibility in Myosin V," In Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE), August 4-7, 2013. Portland, Oregon, USA.
Zachary Brush, Alan Bowling, Michael Tadros, and Michael Russell, "Design and control of a smart bed for pressure ulcer prevention," In Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), July 9-12, 2013. Wollongong, Australia.
Journal Articles
Mahdi Haghshenas-Jaryani and Alan Bowling, "A New Switching Strategy for Addressing Euler Parameters in Rigid Multibody Systems," Multibody System Dynamics, vol. 30, no. 2, pages 185-197, August 2013.
Journal Articles
Braun EM, Lu FK, Sagov MS, Wilson DR, Grubyi, P. Feasibility of linear power generation from a detonation wave source.
Braun EM, Lu FK, Wilson DR, Camberos, JA. Airbreathing rotating detonation wave engine cycle analysis. Aerospace Science and Technology, 27(1):201–208, 2013.
Lu FK, Braun EM, Massa L, Wilson DR. Rotating detonation wave propulsion: experimental challenges, modeling, and engine concepts.
Journal Articles
Chudoba B., Coleman, G., Gonzalez, L., Oza, A., Czysz, P. “Solution Space Screening of a Hypersonic Endurance Demonstrator,” No. TBD, Vol. TBD, Journal of Spacecraft and Rockets, AIAA, TBD.
Chudoba B., Oza, A., and Coleman G., “A Scenario Based Methodology to Evaluate Advanced Civil Transport Concepts and Technologies,” No. TBD, Vol. TBD, Journal of Aircraft, AIAA, TBD.
Chudoba, B., “Identification of Design-Constraining Flight Conditions for Conceptual Sizing of Flight Vehicle Control Effectors,” No. TBD, Vol. TBD, The Aeronautical Journal, TBD.
Chudoba, B., Coleman, G., Cook, M.V., and Smith, H. “Trim Equations of Motion for flight Vehicle Conceptual Design,” No. TBD, Vol. TBD, The Aeronautical Journal, TBD.
Coleman, G. and Chudoba, B., “Modern Stability and Control Assessment of the Northrop YB-49 Flying Wing Stall Behavior: The Edwards Accident Revisited”, No. TBD, Vol. TBD, Journal of Aircraft, AIAA, TBD.
Oza, A., Coleman, G., Watters, B., Chudoba, B., Heinze, W., and Burdun I., “A Conceptual Design Study of the Cessna Citation X Through a Product Life-Cycle Methodology,” No. TBD, Vol. TBD, Journal of Aircraft, AIAA, TBD.
Book Chapters
Dennis, B. H.; Egorov, I. N.; Dulikravich, G. S.; Yoshimura, S. Parallel Optimization of 3‐D Turbine Blade Cooling Passages. In Evolutionary Design Optimization Methods in Aeronautical and Turbomachinery Engineering; G. Degrez, J. Periaux, and M. Sefrioui, Eds.; John Wiley & Sons:.
Journal Articles
Baker, D. P., Dulikravich, G. S., Dennis, B. H., & Martin, T. J. Inverse Determination of Eroded Smelter Wall Thickness Variation Using an Elastic Membrane Concept. ASME Journal of Heat Transfer.
Conference Papers
Erturk, S. and Dogan, A., “Trim Analysis of a Moving-mass Actuated Airplane in Steady Turn”, AIAA paper 2013-0622, proceeding of 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Grapevine (Dallas/Ft. Worth Region), Texas, Jan 7-10, 2013.
Sevil, H. E. and Dogan, A., “Airdata Sensor Fault Detection and Isolation for Receiver Aircraft in Aerial Refueling”, AIAA paper 2013-0950, proceeding of 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Grapevine (Dallas/Ft. Worth Region), Texas, Jan 7-10, 2013.
Journal Articles
Dogan, A., Blake, W. and Haag, C., "Bow Wave Effect in Aerial Refuling: Computational Analysis and Modeling", AIAA Journal of Aircraft, v. 50, no. 6, 2013, pp. 1856-1868, doi: http://arc.aiaa.org/doi/abs/10.2514/1.C032165
Lee, J., Sevil, H. E., Dogan, A. and Hullender, D., "Estimation of Maneuvering Aircraft States and Time-varying Wind with Turbulence", Aerospace Science and Technology, v. 31, n. 1, December 2013, doi: 10.1016/j.ast.2013.09.009, http://authors.elsevier.com/sd/article/S1270963813001703
Editorial Roles
ASSOCIATE EDITOR
ASME Press Book Series in Electronic Packaging
EDITORIAL ADVISORY BOARD
Inverse Problems in Engineering and numerical heat transfer journals
EDITORIAL EXPERIENCE
Editorial Advisory Board, Numerical Heat Transfer, 2002-Present
EDITORIAL EXPERIENCE
Advisory Board, Inverse Problems in science and Engineering, 2004-Present
EDITORIAL EXPERIENCE
Associate Editor, ASME Press Book Series in Electronic Packaging, 2002-Present
Journal Articles
Huang, H., “Flexible wireless antenna sensor: a review”, available on line, IEEE Sensor Journal Special Issue on Flexible Sensors and Sensing Systems (Top 25 downloaded in Feb. 2013).
Wang, Y., Meletis, E.I. and Huang, H., 2013, “Study of surface roughness evolution during fatigue of 316L stainless steel”, v48, International Journal of Fatigue, p280-288.
Awards and Honors
AFOSR Summer Faculty Fellow, 2013
ASME EPP Division Young Engineer Award 2013
2013 ASME Electronics & Photonics Packaging Division (EPPD) Young Engineer Award "for Outstanding Contributions as a Young Engineer to the Field of Electronic and Photonic Packaging Demonstrated through Papers, Patents, or Product Development".
Conference Papers
Banait, A., Vishwakarma, V., Choobineh, L., Jain, A., 'Growth of patterned micropores in poly-dimethylsiloxane (PDMS) using the thermocapillary effect', Proc. ASME IMECE 2013, San Diego, CA.
Choobineh, L., Agonafer, D., Jain, A., 'Analytical modeling of temperature distribution in interposer-based microelectronic systems', Proc. ASME/IEEE InterPACK 2013, San Francisco, CA.
Choobineh, L., Vo, N., Uehling, T., Jain, A., 'Experimental Measurement of the Thermal Performance of a Two-Die 3D Integrated Circuit (3D IC)', Proc. ASME/IEEE InterPACK 2013, San Francisco, CA.
Mirza, F., Naware, G., Raman, T., Jain, A., Agonafer, D., 'Effect of TSV Joule Heating on Device Performance', Proc. ASME/IEEE InterPACK 2013, San Francisco, CA.
Sarkar, D., Haji-Sheikh, A., Jain, A., 'Analytical temperature distribution in a multi-layer tissue structure in the presence of a tumor', Proc. ASME IMECE 2013, San Diego, CA.
Editorial Roles
Guest Editor
Guest Editor, IEEE Transactions on Components, Packaging and Manufacturing Technologies, 2013-present.
Journal Articles
Banait, A., Vishwakarma, V., Choobineh, L., Jain, A., 'Thermally-assisted spatially-directed pore formation in Poly-dimethylsiloxane (PDMS),' Appl. Phys. Lett., 103, 153702, 2013.
Choobineh, L., Jain, A., 'Determination of temperature distribution in three-dimensional integrated circuits (3D ICs) with unequally-sized die', Applied Thermal Engineering, 56, 2013, pp. 176-184.
Lingam, D., Parikh, A.R., Huang, J., Jain, A., Minary-Jolandan, M.*, ‘Nano/Microscale pyroelectric energy harvesting: Challenges and opportunities,’Int. J. Smart Nano. Mater., 4, pp. 1-17, 2013.
Patel, B., Jain, A., 'Thermal modeling of ultra-violet nanoimprint lithography,' ASME J. Manufac. Sc. Engg. (Special Issue on Thermally Assisted Manufacturing), 135(6), pp. 064501, 2013.
Presentations
Experimental and Analytical Characterization of Thermal Transport in Li-ion Batteries
Invited Seminar, Aerospace Vehicles Directorate, Air Force Research Labs (AFRL), Wright Patterson Air Force Base (WPAFB), OH, July 30, 2013.
Thermal Modeling and Design of Three-Dimensional Integrated Circuits: Challenges and Opportunities
Invited Seminar, Information Science Institute (ISI), University of Southern California, Feb 6, 2013.
Thermal Phenomena in Biological Microdevices.
Invited Seminar, Indo-US Workshop on Micro/Nanoscale Heat Transfer, Indian Institute of Technology (IIT), Ropar, India, Dec 21-22, 2013.
Awards and Honors
Graduate Tuition Fellowship, Fall, 2012 ~ Spring, 2013
Journal Articles
Ki, J., Kim, D., Performance evaluation of dynamic model of compact heat exchange reformer for high temperature fuel cell systems, Journal of Fuel Cell Science and Technology
Editorial Roles
Editorial Service
ISRN Tribology, Editorial Board, April 2012~
Patents
Hybrid Air Foil Thrust Bearings With External Hydrostatic Pressure Supplies. Patent No. 61/375,063
Hybrid Air Foil Thrust Bearings With External Hydrostatic Pressure Supplies
Conference Papers
Lu FK, Gupta NKM, Wilson DR. Point measurement of detonation wave speed, Paper No. 0246-000303, 29th International Symposium on Shock Waves, July 17–22, 2013, Madison, Wisconsin, USA
Hussein SM, Blaiszik EM, Lu FK. Velocity fluctuations in the interaction of homogeneous, isotropic turbulence and a detonation wave, Paper No. 0246-000173, 29th International Symposium on Shock Waves, July 17–22, 2013, Madison, Wisconsin, USA
Joshi DD, Vadassery P, Lu FK. Acceleration compensation for force measurements in low and high enthalpy hypersonic facilities, AIAA Paper 2013-1020, 51st AIAA Aerospace Sciences Meeting, January 7–10, 2013, Grapevine, Texas.
Joshi, DD, Lu FK. Unsteady force measurements for hypersonic shock tunnel, Paper No. 0246-000131, 29th International Symposium on Shock Waves, July 17–22, 2013, Madison, Wisconsin, USA
Rolim TC, Lu FK. Design and Stream Thrust Analysis of a Scramjet Engine for Acceleration Mission from 2 to 3 km/s, AIAA Paper 2013-0120, 51st AIAA Aerospace Sciences Meeting, January 7–10, 2013, Grapevine, Texas.
Rolim TC, Lu FK. Experimental investigation of the effects of lateral cowl length in an inward turning scramjet inlet, AIAA 2013-0549, 51st AIAA Aerospace Sciences Meeting, January 7–10, 2013, Grapevine, Texas.
Rolim, TC, Lu FK. Experimental investigation of a hypersonic inlet with variable sidewall for flow control, Paper No. 0246-000172, 29th International Symposium on Shock Waves, July 17–22, 2013, Madison, Wisconsin, USA
Vilela RGS, Toro PGP, Leite VSFO, Rolim TC, Lu FK. Inward 2-D scramjet analytic and numerical analysis at Mach number 7 and dimensional design for experimental investigations, 22nd International Congress of Mechanical Engineering (COBEM 2013), November 3–7, 2013, Ribeirão Preto, SP, Brazil
Werling, Jr., MG, Gutierrez JE, Braun EM, Lu FK. Force measurements on a NACA 0012 wingtip at Mach 0.75, AIAA Paper 2013-1026, 51st AIAA Aerospace Sciences Meeting, January 7–10, 2013, Grapevine, Texas.
Journal Articles
Lu FK. Book review of “Shock Wave Dynamics: Derivatives and Related Topics,” Shock Waves, 23(6):659–660, 2013 (doi: 10.1007/s00193-013-0473-4)
Braun EM, Lu FK, Wilson DR, Camberos, JA. Airbreathing rotating detonation wave engine cycle analysis, Aerospace Science and Technology, 27(1):201–208, 2013 (doi: 10.1016/j.ast.2012.08.010)
Vadassery P, Joshi DD, Rolim TC, Lu FK. Design and testing of an external drag balance for a hypersonic shock tunnel, Measurement, 46(7):2110–2117, 2013 (doi: 10.1016/j.measurement.2013.03.011).
Wen C-S, Chung KM, Lai W-H., Lu FK. An experimental study on DDT distance of JP-8 mixtures. Shock Waves, 23(5):473–479, 2013 (doi: 10.1007/s00193-013-0455-6)
Patents
Lu FK, Dunn NL. System and method for power production using a hybrid helical detonation device. Patent No. US8127533
The system and method described herein uses a hybrid pulsed detonation engine (PDE) system to drive a turbine that powers an electric generator. The combustion chamber of the PDE is shaped in a helical form, so that the external length of the section is reduced, while maintaining the distance for acceleration to detonation. This allows the achievement of deflagration to detonation transition without the help of turbulence enhancing obstacles, while keeping the overall size of the detonation tube small. The PDE output can be scaled by: increasing the cross sectional area of the detonation chamber; increasing the number of detonation tubes; and increasing the frequency of operation of the PDE. The replacement of conventional deflagrative internal combustion engines, including gas turbines and reciprocating engines, with pulsed detonation engines for electric power generation, may provide fuel savings and have a lower environmental impact.
Lu FK, Panicker PK, Wilson DR, Li Juin-Ming. System and method for power production using a hybrid helical detonation device. Patent No. US8544280
The system and method described herein uses a hybrid pulsed detonation engine (PDE) system to drive a turbine that powers an electric generator. The combustion chamber of the PDE is shaped in a helical form, so that the external length of the section is reduced, while maintaining the distance for acceleration to detonation. This allows the achievement of deflagration to detonation transition without the help of turbulence enhancing obstacles, while keeping the overall size of the detonation tube small. The PDE output can be scaled by: increasing the cross sectional area of the detonation chamber; increasing the number of detonation tubes; and increasing the frequency of operation of the PDE. The replacement of conventional deflagrative internal combustion engines, including gas turbines and reciprocating engines, with pulsed detonation engines for electric power generation, may provide fuel savings and have a lower environmental impact.
Journal Articles
Chakraborty, A., Xiang, M. and Luo, C., Fabrication of super-hydrophobic microchannels via strain-recovery deformations of polystyrene and oxygen reactive ion etch, Materials, Vol. 6, pp. 3610-3623, 2013.
Heng, X. and Luo, C., Flexible PDMS Microtubes for Examining Local Hydrophobicity, Microsystem Technologies (in press).
Luo, C. and Xiang, M., Wetting States on Circular Micropillars with Convex Sidewalls after Liquids Contact Groove Base, Langmuir, Vol. 29(48), pp. 15065–15075, 2013.
Qiao, L. and Luo, C., Propulsion of a micro submarine using a thermally oscillatory approach, Journal of Micromechanics and Microengineering, Vol. 23 (10), 105011, 2013.
Xiang, M., Wilhelm, A. and Luo, C., Existence and Role of Large Micropillars on a Lotus Leaf, Langmuir, Vol. 29, pp. 7715-7725, 2013.
Conference Proceedings
Makeev, A., Bakis, C., Strauch, E., Chris, M., Holemans, P., Miller, G., Spencer, D., Patz, N. (2013) Advanced Composite Materials Technology for Rotorcraft, Proceedings of the 39th European Rotorcraft Forum, Moscow, Russia
Makeev, A., Nikishkov, Y., Seon, G., Armanios, E. (2013) Effects of Defects of Interlaminar Performance of Composites, Proceedings of the 39th European Rotorcraft Forum, Moscow, Russia
Makeev, A., Nikishkov, Y., Seon, G., Armanios, E. (2013) Methods for Assessing Interlaminar Tensile Properties in Composite Materials, Proceedings of American Society for Composites 28th Technical Conference, University Park, Pennsylvania
Nikishkov, G., Nikishkov, Y., Makeev, A. (2013) Ply Waviness Detection and Mesh Generation for Composites Based on X-Ray Computed Tomography, Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada
Nikishkov, Y., Seon, G., Makeev, A. (2013) Effects of Defects on Interlaminar Tensile Behavior in Carbon/Epoxy Composites, Best Paper Award in the Structures and Materials Sessions, Nominated for the Best Paper Award of the American Helicopter Society 69th Annual Forum, Phoenix, Arizona
Seon, G., Nikishkov, Y., Makeev, A. (2013) Structural Methods for Assessment of Interlaminar Tensile Properties of Composites In the Presence of Porosity/Voids, Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada
Journal Articles
Makeev, A. (2013) Interlaminar Shear Fatigue Behavior of Glass/Epoxy and Carbon/Epoxy Composites, Composites Science and Technology, 80 (2013), pp. 93–100.
Makeev, A., Carpentier, P., Shonkwiler, B. (2013) Methods to Measure Interlaminar Tensile Modulus of Composites, Composites: Part A, Available Online, October 26, 2013. http://dx.doi.org/10.1016/j.compositesa.2013.10.018
Makeev, A., He, Y. (2013) Short-Beam Shear Method for Assessment of Stress-Strain Curves for Fiber-Reinforced Polymer-Matrix Composite Materials, Strain (2013) 49, pp. 440-450.
Nikishkov, G., Nikishkov, Y., Makeev, A. (2013) Finite Element Mesh Generation for Composites with Ply Waviness based on X-Ray Computed Tomography, Advances in Engineering Software, 58 (2013), pp. 35-44.
Nikishkov, Y., Airoldi, L., Makeev, A. (2013) Measurement of Voids in Composites by X-Ray Computed Tomography, Composites Science and Technology, 89 (2013), pp. 89-97. http://dx.doi.org/10.1016/j.compscitech.2013.09.019
Nikishkov, Y., Makeev, A., Seon, G. (2013) Progressive Fatigue Damage Simulation Method for Composites, International Journal of Fatigue, 48 (1), pp. 266-279.
Seon, G., Makeev, A., Nikishkov, Y., Lee, E. (2013) Effects of Defects on Interlaminar Tensile Fatigue Behavior of Carbon/Epoxy Composites, Composites Science and Technology, Available Online, October 19, 2013. http://dx.doi.org/10.1016/j.compscitech.2013.10.006
Seon, G., Nikishkov, Y., Makeev, A. (2013) Structural Analysis of Composites with Porosity Defects based on X-Ray Computed Tomography, Journal of Composite Materials, Published Online, July 15, 2013. DOI: 10.1177/0021998313494917
Conference Papers
Sevil, H.E., Dogan, A., “Airdata Sensor Fault Detection and Isolation for Receiver Aircraft in Aerial Refueling”. ASM 2013, AIAA Aerospace Sciences Meeting, Grapevine, USA, 7-10 January 2013, AIAA 2013-0950.
Journal Articles
Lee, J.H., Sevil, H.E., Dogan, A., Hullender, D., “Estimation of Maneuvering Aircraft States and Time-Varying Wind with Turbulence”. Aerospace Science and Technology, vol. 31, no. 1, pp. 87-98, 2013.
Book Chapters
V. Varanasi, P. S. Shiakolas, and P. Aswath, Engineered Scaffolds: Materials and Microstructure from Nanostructures to Macrostructures for Tissue Engineering in Scaffolds for Tissue Engineering - Biological Design, Materials and Fabrication by Claudio Migliaresi, University of Trento, Italy, and Antonella Motta, University of Trento, Italy) Hardback 400 pages 2014-03-31 Print ISBN: 9789814463201
Journal Articles
Rizwan, Mohsin, and Panos S. Shiakolas. "On the Acceleration Limits for Sliding and Detachment Between Contacting Rough Surfaces for Micropart Manipulation in a Dry Environment."Journal of Micro and Nano-Manufacturing1.1 (2013): 011005.
Rizwan, Mohsin, and Panos S. Shiakolas. "On the optimum synthesis of a microconveyor platform for micropart translocation using differential evolution."Inverse Problems in Science and Engineering21.8 (2013): 1335-1351. DOI:10.1080/17415977.2013.764293
Journal Articles
D. Shin and D. Banerjee, 2013, “Enhanced specific heat capacity of nanomaterials synthesized by dispersing silica nanoparticles in eutectic mixtures,” J. Heat Transfer 135(3), 032801
B. Dudda and D. Shin, 2013, "Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications," International Journal of Thermal Sciences, 69, 37.
H. Tiznobaik and D. Shin, 2013, "Enhanced specific heat capacity of high-temeprature molten salt-based nanofluids," International Journal of Heat and Mass Transfer 57 (2) 542.
H. Tiznobaik and D. Shin, 2013, "Experimental validation of enhanced heat capacity of ionic liquid-based nanomaterial," Appl. Phys. Lett. 102, 173906.
S. Achaya, J. Alvarado, D. Bannerjee, W. E. Billups, G. Chen, B. A. Cola, W. Cross, E. Duke, S. Graham Jr., H. He, H. Hong, S. Jin, S. Karna, C. Li, C. H. Li, J. Li, G. P. Peterson, J. A. Puszynski, J. Routbort, J. Shan, D. Shin, A. Smirnova, P. Smith, X. Wang, A. Waynick, R. White, X. Yan, W. Yu, 2013, "Report on carbon nano material workshop: challenges and opportunities," Journal of Nanoscale & Microscale Thermophysical Engineering, 17(1), 10.
Journal Articles
Obradovic, B. and Subbarao, K., "Modeling of Dynamic Loading of Morphing Wing Aircraft," AIAA Journal of Aircraft,.
Obradovic, B. and Subbarao, K., "Modeling of Flight Dynamics of Morphing Wing Aircraft," A!AA Journal of Aircraft,.
Journal Articles
B. Yang and N. Vijayanand, Multiscale fracture in peeling of highly oriented pyrolytic graphite, Key Engineering Materials 560, 71-86 (2013).
H. Jiang and B. Yang, Force-moment line element method for flexible slender bodies in Stokes flow, Physical Review E 88, 033306 (2013).
H. Jiang, B. Yang and S. Liu, Effects of transverse shear on strain stiffening of biological fiber network, Computers, Materials, & Continua 38, 61-77 (2013).
M. Manjare, B. Yang, Y.-P. Zhao, Bubble propelled microjets: Model and experiment, Journal of Physical Chemistry 117, 4657-4665 (2013).
College of Engineering
Dean Khosrow Behbehani
Office of the Dean
Pranesh B. Aswath
Awards and Honors
Graduate Dean’s 2013 Excellence in Doctoral Mentoring Award
One award is given in the entire university to a faculty member in recognition of their efforts in mentoring Doctoral students. The award is presented annually.